Morphological and Mechanical Investigation of Recycled PLA Bio-Nanocomposite Reinforced by Cellulose Nanofibers
Conference paper: November 2016 – The 12th International Seminar on Polymer Science and Technology, Tehran.
Tayebeh Behzad, Pejman Heidarian, Keikhosro Karimi, Mohammad Kazem Maniei, Mohini Sain.
DOI: 10.3390/ma9070548

Organosolv Treatment of Lignocelollusic Biomass
Presentation: June 2016 – 14th International Symposium on Bioplastics, Biocomposites and Biorefining, Guelph.
Nasim Ramezani, Mohini Sain.
DOI:10.13140/RG.2.2.10882.27846

Biopolyamide Hybrid Composites for Automotive Applications
Poster: June 2016
Shaghayegh Armioun, Suhara Panthapulakkal, Mohini Sain, Jimi Tjong.

Investigation of Sugarcane Lignin-Based Polypropylene Composites
Poster: May 2016 – 14th International Symposium on Bioplastics, Biocomposites and Biorefining, Guelph.
Ivana Cesarino, Otavio Dias, Rodrigo Wagner Guimarães, Alcides Leao, Mohini Sain, Rita de Cássia da Silva.

Organosolv Treatment of Lignocelollusic Biomass
Presentation: June 2016 – 14th International Symposium on Bioplastics, Biocomposites and Biorefining, Guelph.
Nasim Ramezani, Mohini Sain.
DOI:10.13140/RG.2.2.10882.27846

Renewable, Recyclable, and Lightweight Structural Prototype for Greener Automotive Interior Panels
Presentation: October 2015 – 65th Canadian Chemical Engineering Conference.
Shaghayegh Armioun, Suhara Panthapulakkal, Mohini Sain, Jimi Tjong.
www.researchgate.net/publication/299604773_Renewable_Recyclable_and_Lightweight_Structural_Prototype_for_Greener_Automotive_Interior_Panels

Morphology and Thermal Properties of Surface Modified Cellulose Aerogels
Conference paper: September 2015 – XIV Brazil MRS Meeting, Rio de Janeiro.
Tattiane Gomes Costa, Alessandra Fonseca, Mario Guimarães Jr., Suhara Panthapulakkal, Joabel Raabe, Mohini Sain, G.H.D. Tonoli.
www.researchgate.net/publication/282326308_MORPHOLOGY_AND_THERMAL_PROPERTIES_OF_SURFACE_MODIFIED_CELLULOSE_AEROGELS

Cellulose-Silica Aerogel from Eucalyptus Kraft Pulp
Conference paper: September 2015 – Congresso Brasileiro de Ciência e Tecnologia da Madeira, Belo Horizonte.
Tatiana Paula De Marques Arruda, Lina Bufalino, Alessandra Fonseca, Mario Guimarães Jr., Gustavo Henrique, Suhara Panthapulakkal, Joabel Raabe, Mohini Sain, Caroline Sartori, G.H.D. Tonoli.
www.researchgate.net/publication/282326662_CELLULOSE-SILICA_AEROGEL_FROM_Eucalyptus_KRAFT_PULP

Effect of Pretreatments on the Production of Cellulose Nanofibres from Amazon Liberian Fibers
Conference paper: November 2014 – 15th NOCMAT 2014 – 30 Years, Pirassununga.
Alessandra Fonseca, Mario Guimarães Jr., Shiang Law, I.P.A. Miranda, Suhara Panthapulakkal, Mohini Sain, G.H.D. Tonoli.
www.researchgate.net/publication/282326553

Development and Process Optimization of Sisal/Glass Fiber Reinforced Polypropylene Composite
Conference paper: August 2014 – The Composite and Advanced Material Expo, Orlando.
J.A.M. Angnelli, M. Jose Augusto, Birat K.C., Suhara Panthapulakkal, Mohini Sain, Jimi Tjong.
www.researchgate.net/publication/262874166_Development_and_process_optimization_of_sisalglass_fiber_reinforced_polypropylene_composite

Morphology and Mechanical Properties of Polylactic Acid Cellulose Nanofiber Composite Foams
Conference paper: April 2014 – Society of Plastics Engineers, 72nd Annual Technical Conference, Las Vegas.
W.D. Ding, Pei-Yu Kuo, C.B. Park, Mohini Sain.
www.researchgate.net/publication/262874741_Morphology_and_Mechanical_Properties_of_Polylactic_Acid_Cellulose_Nanofiber_Composite_Foams

Green Nanotechnology in Nanofiber
Conference paper: September 2013 – 6th International WPC Symposium, Biarritz.
Ruijun Gu, Mohini Sain.
www.researchgate.net/publication/281842648_Green_nanotechnology_in_nanofiber

Carbon Fiber Reinforced Composites for Automotive
Conference paper: July 2013 – The 19th International Conference on Composite Materials, Montreal.
Ruijun Gu, Mohini Sain.
www.researchgate.net/publication/281842719_Carbon_fiber_reinforced_composites_for_automotive

Development of Multi-Scale Biocomposites from Flax, Nanocellulose and Epoxy by Resin Infusion
Conference paper: July 2013 – The 19th International Conference on Composite Materials, Montreal.
Cristian Demaria, Pascal Hubert, Peiyu Kuo, Larry Lessard, Steven Phillips, Mohini Sain.
www.researchgate.net/publication/303812691_Development_of_Multi-Scale_Biocomposites_from_Flax_Nanocellulose_and_Epoxy_by_Resin_Infusion

Foaming of Cellulose Fiber Reinforced Polylactic Acid Composites : The Effect of Cellulose Fiber type and Content
Conference paper: April 2013 – Society of Plastics Engineers, 71st Annual Technical Conference, Cincinnati.
Wei-Dan Ding, T. Kuboki, Pei-Yu Kuo, C.B. Park, Mohini Sain.
www.researchgate.net/publication/262874900_Foaming_of_Cellulose_Fiber_Reinforced_Polylactic_Acid_Composites_The_Effect_of_Cellulose_Fiber_type_and_Content

Low Carbon Footprint Construction - From Plant Carbon to Green Building
Conference paper: February 2013 – Canada-India Workshop on Building Healthy Communities, Nagpur.
Ruijun Gu, Mohini Sain.
www.researchgate.net/publication/281842503_Low_Carbon_Footprint_Construction-From_Plant_Carbon_to_Green_Building

Multi-Scale Void Fraction Analysis for Cell Density Characterization and Nuclei Density Prediction of Anisotropic Polymeric Foams
Conference paper: December 2012 – 28th International Conference of the Polymer Processing Society, Pattaya.
Amir Ameli, S. Areerat, Piyapong Buahom, C.B. Park, Mohini Sain.
DOI: 10.13140/RG.2.1.4039.4403

Renewable Polyurethane Foams
Conference paper: November 2012 – 2nd Bark Biorefinery Annual Meeting, Toronto.
Ruijun Gu, Mohini Sain.
www.researchgate.net/publication/281842728_Renewable_polyurethane_foams

Mechanical Properties of Cellulose Nanofiber Reinforced Polylactic Acid Biocomposites and Their Foams
Conference paper: June 2012 – Canadian Society for Mechanical Engineering (CSME) International Congress, Winnipeg.
Wei-Dan Ding, T. Kuboki, T. Malm, C.B. Park, Mohini Sain, Na Zhao.
www.researchgate.net/publication/262875068_Mechanical_Properties_of_Cellulose_Nanofiber_Reinforced_Polylactic_Acid_Biocomposites_and_Their_Foams

Development and Microstructural Investigation of Modified Polysaccharide Based Polyester Biocomposites
Conference paper: May 2012 – 12th International Conference on Biocomposites, Niagra Falls.
Subrata Bandhu Ghosh, Mohini Sain.
www.researchgate.net/publication/262646628_Development_and_Microstructural_Investigation_of_Modified_Polysaccharide_based_Polyester_Biocomposites

In Situ Observation of the Foaming Processes of Cellulose Nanofiber Reinforced Polylactic Acid Biocomposites
Conference paper: January 2012 – Society of Plastics Engineers Annual Technical Conference, Orlando.
Wei-Dan Ding, T. Kuboki, C.B. Park, Mohini Sain, Anson Wong.
www.researchgate.net/publication/260410891_In_situ_observation_of_the_foaming_processes_of_cellulose_nanofiber_reinforced_polylactic_acid_biocomposites

Global Perspective: NF Composites in Automotive
Conference paper: October 2011 – 5th International WPC Forum of China, Huangshi.
Ruijun Gu, Muhammad Pervaiz, Mohini Sain.
www.researchgate.net/publication/281842733_Global_perspective_NF_composites_in_automotive

Greener foam: Global Research, Development and Commercialization
Conference paper: September 2011 – 19th Annual BioEnvironmental Polymer Society Meeting, Vienna.
Ruijun Gu, Mohini Sain.
www.researchgate.net/publication/281842593_Greener_foam_Global_research_development_and_commercialization

Foaming of Cellulose Nanofiber Reinforced Poly(lactic Acid) Biocomposites
Conference paper: June 2011 – Forest Products Society 65th International Convention, Portland.
Wei-Dan Ding, Takashi Kuboki, C.B. Park, Mohini Sain, Anson Wong.
www.researchgate.net/publication/260415949_Foaming_of_Cellulose_Nanofiber_Reinforced_Polylactic_acid_Biocomposites

Solid-State Foaming of Cellulose Nanofiber Reinforced Polylactic Acid Biocomposites
Conference paper: May 2011 – Society of Plastics Engineers, 69th Annual Technical Conference, Boston.
Wei-Dan Ding, R. Koyama, T. Kuboki, C.B. Park, Mohini Sain.
www.researchgate.net/publication/262875081_Solid-State_Foaming_of_Cellulose_Nanofiber_Reinforced_Polylactic_Acid_Biocomposites

Where Wood Plastic Composites Go
Conference paper: October 2010 – 4th International Summit Wood Plastic Composite, Nanjing.
Ruijun Gu, Mohini Sain.
www.researchgate.net/publication/281842822_Where_wood_plastic_composites_go

Polylactide Composites Filled with Microcrystalline Cellulose, Nanocrystalline Cellulose and Cellulose Nanofibers
Conference paper: January 2010 – ANTEC, Orlando.
Johanne Denault, John Luong, Mohini Sain, Karen Stoeffler, Minh Tan Ton-That, Crystal Wu.
www.researchgate.net/publication/50277648_Polylactide_composites_filled_with_microcrystalline_cellulose_nanocrystalline_cellulose_and_cellulose_nanofibers_ANTEC_2010_Proceedings

Extrusion Foaming of Cellulose Fiber Reinforced Polypropylene Composites
Conference paper: November 2009 – AIChE Annual Meeting.
T. Kuboki, R. Koyama, J.W.S. Lee, C.B. Park, Mohini Sain, Q. Wu, J. Zhang.
https://www.researchgate.net/publication/264549963_Extrusion_foaming_of_cellulose_fiber_reinforced_polypropylene_composites

Synthesis and Characterization of the Next Generation Bio-Polyol and Bio-Foam
Conference paper: August 2009 – 8th World Congress of Chemical Engineering, Montreal.
Sanchita Bandyopadhyay-Ghosh, Subrata Bandhu Ghosh, S. Ghosh Roy, Mohini Sain.
https://www.researchgate.net/publication/264167289_Synthesis_and_characterization_of_the_next_generation_bio-polyol_and_bio-foam

Foam Injection Molding of Cellulose Fiber Reinforced Polypropylene Composites
Conference paper: January 2009 – Annual Technical Conference- ANTEC.
T. Kuboki, J.W.S. Lee, C.B. Park, Mohini Sain.
https://www.researchgate.net/publication/264549969_Foam_injection_molding_of_cellulose_fiber_reinforced_polypropylene_composites

Effect of Clay on Extrusion Foaming of Wf/PP/Clay Composites Using N2
Conference paper: November 2008 – AIChE Annual Meeting.
Takashi Kuboki, Yoon H. Lee, C.B. Park, Mohini Sain.
https://www.researchgate.net/publication/267319804_Effect_of_Clay_on_Extrusion_Foaming_of_WfPPClay_Composites_Using_N2

Morphological Characterization of Bio-Fiber Composite Foams
Conference paper: June 2008 – Polymer Processing Society 24th Annual Meeting, Salerno.
Gangjian Guo, Takashi Kuboki, Steven R. Nutt, C.B. Park, Ghaus Rizvi, Mohini Sain.
https://mpml.mie.utoronto.ca/lab/Publications/conference_inlineframe.html

Light Weight High Performance Biomaterials and Nano Technology for Green Automotive Applications
Conference paper: June 2008 – AUTO21 2008 Conference, Collaboration in Motion, London.
Subrata Bandhu Ghosh, Takashi Kuboki, Shiang Law, Y.H. Lee, C.B. Park, Mohini Sain.
https://www.researchgate.net/publication/264167201_Light_weight_high_performance_biomaterials_and_nano_technology_for_green_automotive_applications

Mechanical Properties and Foamability of Cellulose Fiber Composites
Conference paper: June 2008 – CSME Forum, Ottawa.
Y.H. Lee, Takashi Kuboki, C.B. Park, Mohini Sain.
https://www.researchgate.net/publication/262875232_Mechanical_Properties_and_Foamability_of_Cellulose_Fiber_Composites

Evaluation of Mechanical Properties of Wood Pulp Reinforced Biocomposite Fibres
Conference paper: May 2008 – 10th International Conference on Progress in Biofibre Plastic Composites, Toronto.
A. Awal, Subrata Bandhu Ghosh, Sanchita Bandyopadhyay-Ghosh, Mohini Sain.
https://www.researchgate.net/publication/264167302_Evaluation_of_mechanical_properties_of_wood_pulp_reinforced_biocomposite_fibres

Effects of Clay on Mechanical Properties of Injection Molded High-Density Polyethylene/Clay Nanocomposite Foams
Conference paper: May 2008 – SPE, ANTEC, Milwaukee.
Takashi Kuboki, J.W.S. Lee, Y.H. Lee, C.B. Park, Mohini Sain, W. Zhu.
http://www.4spe.org/Resources/resource.aspx?ItemNumber=14009

Extrusion Foaming of Nano-Clay-Filled Wood Fiber Composites for Automotive Applications
Conference paper: April 2008 – SAE International Journal of Materials and Manufacturing.
Takashi Kuboki, Yoon Hwan Lee, C.B. Park, Mohini Sain.
DOI: 10.4271/2008-01-1264 http://papers.sae.org/2008-01-1264/

Effect of Clay on Extrusion Foaming of WF/PP/Clay Composites Using N2
Conference paper: January 2008 – AIChE Annual Meeting.
Takashi Kuboki, Y.H. Lee, C.B. Park, Mohini Sain.
https://www.researchgate.net/publication/264604570_Effect_of_clay_on_extrusion_foaming_of_WFPPclay_composites_using_N2

Effect of Nano-Clay on Foaming of WF/HDPE Composites
Conference paper: May 2007 – Annual Technical Conference 2007 of Society of Plastics Engineers, Cincinnati.
Takashi Kuboki, Y.H. Lee, C.B. Park, Mohini Sain.
https://www.researchgate.net/publication/262875428_Effect_of_nano-clay_on_foaming_of_WFHDPE_composites

Foaming Behaviour of Cellulose Fibre Reinforced High Density Polyethylene Composites
Conference paper: May 2007 – Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Cincinnati.
Takashi Kuboki, Y.H. Lee, C.B. Park, Mohini Sain.
https://www.researchgate.net/publication/262875354_Foaming_Behaviour_of_Cellulose_Fibre_Reinforced_High_Density_Polyethylene_Composites

Strategies for Enhancing Cell Nucleation of Thermoplastic Polyolefin Foam
Conference paper: May 2007 – SPE, ANTEC, Volume: 4, Cincinnati.
S.G. Kim, J.W.S. Lee, C.B. Park, Mohini Sain.
https://www.researchgate.net/publication/262875301_Strategies_for_Enhancing_Cell_Nucleation_of_Thermoplastic_Polyolefin_Foam

Influence of Interfacial Interaction on the Foamability of Wood Fiber/HDPE Composites
Conference paper: April 2007 – SAE World Congress & Exhibition.
Takashi Kuboki, Yoon Hwan Lee, C.B. Park, Mohini Sain.
DOI: 10.4271/2007-01-0577

Mechanical Properties of Rice Hull/High Density Polyethylene and Wood/High Density Polyethylene Composites
Conference paper: April 2007 – SAE World Congress & Exhibition.
Takashi Kuboki, Yoon Hwan Lee, C.B. Park, Mohini Sain.
DOI: 10.4271/2007-01-0576

Foaming Visualization of Thermoplastic Polyolefin (TPO) Blends with N2
Conference paper: April 2007 – SAE World Congress & Exhibition.
S.G. Kim, C.B. Park, Mohini Sain.
DOI: 10.4271/2007-01-0572

Poly (Butyl Acrylate)-Modified Cellulose Fibres for Toughening WPC
Conference paper: April 2007 – SAE World Congress & Exhibition.
Mohini Sain, Zhuang Wang, Huining Xiao.
DOI: 10.4271/2007-01-0574

Mechanical Properties of Rice Hull/Polypropylene Composites
Conference paper: May 2006 – SPE, ANTEC.
Takashi Kuboki, Y.H. Lee, C.B. Park, Mohini Sain.
https://www.researchgate.net/publication/262875454_Mechanical_Properties_of_Rice_HullPolypropylene_Composites

Strategies for Intercalation and Exfoliation of PP/Clay Nanocomposites
Conference paper: April 2006 – SAE 2006 World Congress & Exhibition, Detroit.
Y.H. Lee, C.B. Park, Mohini Sain.
DOI: 10.4271/2006-01-0132

Foamability of Thermoplastic Vulcanizates (TPVs) with Various Physical Blowing Agents (PBAs)
Conference paper: April 2006 – SAE 2006 World Congress & Exhibition, Detroit.
S.G. Kim, C.B. Park, Mohini Sain.
DOI: 10.4271/2006-01-0972

Wood Microfibres-Effective Reinforcing Agents for Composites
Conference paper: April 2006 – SAE 2006 World Congress & Exhibition, Detroit.
Ayan Chakraborty, Mark T. Kortschot, Mohini Sain.
DOI: 10.4271/2006-01-0106

The Effect of Fiber Surface Treatment on the Performance of Hemp Fiber/Acrylic Composites for Automotive Structural Parts
Conference paper: April 2006 – SAE 2006 World Congress & Exhibition, Detroit.
Tayebeh Behzad, Mohini Sain.
DOI: 10.4271/2006-01-0005

Effect of Fungal Modification on Fiber-Matrix Adhesion in Natural Fiber Reinforced Polymer Composites
Conference paper: April 2006 – SAE 2006 World Congress & Exhibition, Detroit.
Tayebeh Behzad, Mohini Sain.
DOI: 10.4271/2006-01-0006

Performance of Injection Molded Natural Fiber-Hybrid Thermoplastic Composites for Automotive Structural Applications
Conference paper: April 2006 – SAE 2006 World Congress & Exhibition, Detroit.
Shiang Law, Suhara Panthapulakkal, Mohini Sain.
DOI: 10.4271/2006-01-0004

Wood Microfibres-Effective Reinforcing Agents for Composites
Conference paper: April 2006 – SAE 2006 World Congress & Exhibition, Detroit.
Mohini Sain.
DOI: 10.4271/2006-01-0106

Foamability of Thermoplastic Vulcanizates (TVPs) with Various Physical Blowing Agents
Conference paper: April 2006 – SAE 2006 World Congress & Exhibition, Detroit.
S.G. Kim, C.B. Park, Mohini Sain.
DOI: 10.1177/0021955X07079224

Introduction to Cellulose Nanocomposites
Conference paper: January 2006 – ACS Symposium Series.
Kristiina Oksman, Mohini Sain.
https://www.researchgate.net/publication/264605075_Introduction_to_cellulose_nanocomposites

Novel SMA Chemistries in Surface Sizing of Paper and Boards
Conference paper: January 2006 – Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC).
W. Dougherty, S. Janardhnan, Muhammad Pervaiz, Mohini Sain.
https://www.researchgate.net/publication/264605003_Novel_SMA_chemistries_in_surface_sizing_of_paper_and_boards

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Chakraborty, A., Sain, M., and Kortschot, M. “Structural Development of Cellulose Microfibres as Biodegradable Reinforcing Agents for Composites” 229th ACS National Meeting, San Diego, CA, USA, March 13-17, 2005 [No. 137] Wang, B., Mok, F. and M. Sain “Dispersion Mechanism of Soybean Stock Based Nanofiber in Plastic Matrix” 229th ACS Annual National Meeting, San Diego, CA, USA, March 13-17, 2005 [No. 136] Gulati, D. and Sain, M. “Surface Treatment of Hemp Fibre for Enhanced Adhesion to Liquid Resin” 229th ACS National Meeting, San Diego, CA, USA, March 13-17, 2005 [No. 135] Behzad, T. and Sain, M. “Process for Manufacturing a High Performance Natural Fiber Composite by Sheet Molding” SME Technical Paper, 2005 [No. 134] Behzad, T., Panthapulakkal, S., Gulati, D., Law, S., Sain, M., and Kokta, B.V. “High Performance Natural Fiber Composites for Automotive Applications” Auto 21, HQP Conference, 2005 [No. 133] Panthapulakkal, S., Law, S., and Sain, M. “Commercial Aspect of Recyclable Thermoplastics-NF Automotive Parts” 229th ACS National Meeting, San Diego, CA, USA, March 13-17, 2005 [No. 132] Panthapulakkal, S., Sain, M., Bouilloux, A., Perrinaud, R., and Law, S. “Enhancement of Impact Strength of Natural Fibre and Hybrid Composites for Automotive Applications” Wood Fibre Polymer Composites Symposium-Applications and Perspectives, Bordeaux, France, March 24-25, 2005 [No. 131] Krigstin, S. and Sain, M. “Recovery of Paper Mill Sludge” Paptac 91st Annual Conference, Montreal, Canada, Feb. 2005 [No. 130] Mathew, A.P., Chacraborty, A., Oksman, K., and Sain, M. “Processing of Cellulose Nanocomposites by Twin Screw Extrusion” ACS, 13-17 March, San Diego, 2005 [No. 129]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Panthapulakkal, S., Sain, M., and Law, S. “Injection Molded Hybrid Natural Fibre- Thermoplastic Composites for Automotive Interior Parts” SAE Technical Paper 2004-01-0014, SAE World Congress, Detroit, March 19-21, 2004, DOI: 10.4271/2004-01-0014 [No. 128] Pervaiz, M. and Sain, M., “High Performance Natural Fiber Thermoplastics for Automotive Interior Parts,” SAE Technical Paper 2004-01-0729, 2004, DOI: 10.4271/2004-01-0729 [No. 127] Rouison, D., Couturier, M., and Sain, M. “The Effect of Surface Modification on the Mechanical Properties of Hemp Fiber/Polyester Composites,” SAE Technical Paper 2004-01-0728, 2004, DOI: 10.4271/2004-01-0728 [No. 126] Ghosh, A. and Sain, M. “Processing of Low Formaldehyde Medium Density Fiberboard Using Renewable Wood Resin” Value to Wood-RAC Meeting, Quebec City, June 9-10, 2004 [No. 125] Sreekumar, J., Sain, M., Farnood, R., and Dougherty, W. “Effect of Styrene Maelic Anhydride Imide Resin (Smai) on Ink-Jet Paper Coating Suspension Rheology” Paptac 91st annual conference, Quebec, Canada, Jan. 2004 [No. 124] Sreekumar, J., Sain, M., Farnood, R., and Dougherty, W. “Inkjet Paper Coating Quality and Runability Enhancement Using Styrene Maelic Anhydride Imide” PAPTAC Midwest Branch Annual Conference, Thunderbay, Canada, September, 2004 [No. 123] Sreekumar, J., Sain, M., Farnood, R., and Dougherty, W. “Styrene Maelic Anhydride Imide Resin (SMAI) in Paper Coating for Ink-jet Printing: Improved Printing with Enhanced Coating Quality & Runability” European Coating Conference, Berlin, Germany, Dec. 2004 [No. 122] Sreekumar, J., Sain, M., Farnood, R., and Dougherty, W. “SMAI-A Novel Ionic Additive in Paper Coating for Ink-jet Printing” PAPTAC 90th Annual Conference, Quebec, Canada, Jan. 2004 [No. 121] Behzad, T. and Sain, M. “Process for Manufacturing a High Performance Natural Fiber Composite by Sheet Molding” 4th Annual Society of Plastics Engineers (SPE), Automotive Composites Conference, 2004 [No. 120] Panthapulakkal, S., Sain, M., and Balatinecz, J. “Flammability of Polyolefin-natural Fibre Composites and its Future in the Automotive Interior Parts” 5th Global Wood and Natural Fibre Composites Symposium, Kassel/Germany, April 27-28, 2004 [No. 119] Lopez, J., Cooper, P., and Sain, M. “Prediction of Durability of Natural Fiber Plastic Composites for Outdoor Applications: Effect of Dead Load and UV Exposure” Proc. 9th International Conf. on Progress in Wood Fibre Plastic Composites, Toronto, May 10-11, 2004 [No. 118] Pramanick, A. and Sain, M. “Performance of Injection Molded Natural Fiber Composites and their Creep Prediction” Biocomposites Research Day, University of Toronto, 2004 [No. 117] Pramanick, A. and Sain, M. “Nonlinear Visco-Elastic Creep Prediction of HDPE-Natural Fiber Composites Under Varying Weathering Parameters” Progress in Wood fiber Plastic Composites Conference, Organized by MMO and University of Toronto, Toronto, 2004 [No. 116] Behzad, T., Panthapulakkal, S., and Sain, M. “Process for Manufacturing a High Performance Natural Fiber Composite by Sheet Molding ” SPE Conference, 2004 [No. 115] Behzad, T. and Sain, M. “Process to Manufacture a High Performance Natural Fiber Composite by Sheet Molding” Auto 21 HQP Conference, 2004 [No. 114] Behzad, T. and Sain, M. “Process to Manufacture a High Performance Natural Fiber Composite by Sheet Molding” Progress in Wood fibre-Plastic Composites Conference, 2004 [No. 113] Bouilloux, A., Panthapulakkal, S., Sain, M., Law, S., and Perrinaud, R. “Hybrid Polyolefin Natural Fibre Composite for Enhanced Stiffness and Mechanical Strength” 5th Global Wood and Natural Fibre Composites Symposium, Kassel/Germany, April 27-28, 2004 [No. 112] Panthapulakkal, S., Sain, M., and Law, S. “Advancement in Natural Fibre Reinforced Hybrid Composites for Automotive Interior Applications” Progress in Wood Fibre-Plastic Composites, Toronto, May 10-11, 2004 [No. 111] Sain, M., Panthapulakkal, S., and Lo, M. “High Performance Natural Fibre Reinforced SMC for Automotive Applications” 4th SPE Automotive Composites Conference, Troy, MI, USA, September 14-16, 2004 [No. 110] Sain, M. “Building Product Industry and Agro-Waste Material” Ivax Chemical Company, Hyderbad, India, January 8, 2004 [No. 109] Sain, M. “North American Perspective in Paper Sizing Technology” Ivax Chemical Company, Hyderbad, India, January 6, 2004 [No. 108] Sain, M. “Prospect of Bio-Composite Industry in Asia”, January 5, 2004 [No. 107]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Sreekumar, J., Sain, M., Farnood, R, and Dougherty, W. “Study and Evaluation of SMAI as a Poly-cationic Additive in Paper Coating for Ink-jet Printing” PAPTAC Midwest Branch Annual Conference, September, Thunderbay, Canada, 2003 [No. 106] Pramanick, A. and Sain, M. “Nonlinear Visco-Elastic Creep Prediction of HDPE-Wood Fiber Composites Under Varying Weathering Parameters” 53rd Canadian Chemical Engineering Conference, Hamilton, 2003 [No. 105] Sreekumar, J., Sain, M., Farnood, R., and Dougherty, W. “Print Image Quality and Coating Composition Correlationship in SMAI based Formulations” 11th Graduate Students Annual Conference, University of Toronto, Canada, Nov. 2003[No. 104] Prasad, B., Bhatnagar, A., and Sain, M. “High Performance Micro and Nano-biofibrils Manufacturing Process” 7th International Conference on Woodfiber-plastic Composites, Madison, 2003 [No. 103] Prasad, B. and Sain, M. “Natural Fibers Composites for Automotive Parts” Group Poster of U of T, Quebec and New Brunswick, Auto Conference, 2003 [No. 102] Prasad, B. and Sain, M. “Effect of Ball Milling on Mechanical Properties of Hemp” (Cannabis Sativ L.) Fibers, 53rd Canadian Chemical Engineering (CSChE2003/PRES’03) Conference in Hamilton, Ontario, Canada October 26-29, 2003 [No. 101] Behzad, T. and Sain, M. “Characterization of an Environmentally Friendly Acrylic Resin for Manufacturing High Performance Bio-composites” Canadian Chemical Engineering Conference, Hamilton, Ontario, Canada, October 26-29, 2003 [No. 100] Sain, M. “Bio-Composite Products and the Future of Bio-Composite Research” University of New Brunswick, December, 2003 [No. 99] Sain, M. and Pervaiz, M. “Bio-Composite Manufacturing Technology” MMO Partnership Program, June 18, 2003 [No. 98] Sain, M. “Present and Future of Natural Composites” Proc. NOBI-Northern Ontario Research Initiatives (CD), St. Marie, January 11, 2003 [No. 97] Sain, M. “Progress in Natural Composite Research for Automotive Applications” Proc. Seminar Francophone International, Ecole Polyetechnique du, Montreal, Canada, February 26, 2003 [No. 96] Sain, M., Panthapulakkal, S., and Law, S. “Physical Properties of Injection Molded Wood fibre-plastics Composites” Proc. Injection Molding Minitech, Toronto, ON. (CD), March 22, 2003 [No. 95] Sain, M., Law, S., Panthapulakal, S., and Boullioux, A. “Stiffness-correlation of Polyolefin-wood fibre Composites” Proc. International Wood fibre Plastics Conference, Bordeaux, France, March 27, 2003 [No. 94] Valton, E., Sain, M., and Schidtheauser, J. “Understanding Coating Chemicals Interaction Using TOF-SIMS” Paptac Annual Meeting, Montreal (CD), January 30, 2003 [No. 93] Rouison, D., Sain, M., and Couturier, M. “Resin Transfer Molding of Polyester-natural Fibre Composite for Performance Applications” 7th International Conference on Woodfiber-Plastic Composites, Madison, WI, May 19-20, 2003 [No. 92] Zhang, V. and Sain, M. “Isolation and Identification of Sterols and Steroids in the TMP Effluent” The 5th International Conference on Fate and Effects of Pulp and Paper Mill Effluents, Seattle, US, June 2-4, 2003 [No. 91] Sain, M., Mehta, A., Ni, Y., and Morneau, D. “Chemical Additive Optimization Program: Short-cycle Clarification of Deinking Mill Alkaline–water Loop” Paptac Annual Meeting, Montreal (CD), January 30, 2003 [No. 90]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Zhang, V. and Sain, M. “Isolation and Identification of Toxic Chemicals in Wood Bark and Its Correlation to Pulp Mill Effluent” International Environmental Conference and Exhibit, Montreal, QC, Canada, 193- 205 Publisher: Tappi Press, Atlanta, Ga, Apr.6-10, 2002 [No. 89] Sain, M. “Progress in Automotive Composite Research” 1st Annual Student Conf., Network of Centre of Excellence, Group Leader Presentation, Auto-21, May 6, 2002 [No. 88] Sain, M., Prasad, B., Pervaiz, M., Rouison, D., and Law, S. “Natural Fibre in Automotive Research” NCE-Auto 21 HQP Meeting, London, ON. Poster Session, May 6, 2002[No. 87] Sain, M., Prasad, B., Pervaiz, M., Rouison, D. and Law, S. “Natural Fibre Composites Research Progress” NCE-Auto 21, Poster Session Annual Meeting, Toronto, ON, June 12, 2002 [No. 86] Sain, M. “Natural Fibre Research at University Toronto” SUNMAT, Brussels, Belgium, November 8-12, 2002 [No. 85] Sain, M., Rouison, D., and Schmidhauser, J. “The Use of Styrene Copolymers in Surface Sizing of Acid and Alkaline Papers” Annual Meeting-Technical Section, Canadian Pulp and Paper Association, 88 th Annual Meeting, Montreal, pp.C81-C85, Jan.31, 2002 [No. 84] Rouison, D., Sain, M. and Couturier, M. “Resin Transfer Molding of Natural Fiber Plastic” Proc. 7th Toronto Conference on Progress in Woodfiber-Plastic Composites 2002, Toronto, ON. May 23-24, 2002 [No. 83] Rouison, D., Sain, M. and Couturier, M. “Study of The Curing Behavior of Natural Fiber Plastic Using a Resin Transfer Molding Process” Proc. Chemical Engineering Annual meeting, Vancouver, October 10, 2002 [No. 82] Lin, W.S. and Sain, M. “Predict Performance of Discontinuous Natural Fibre-polymer Composites” Proc. Japan-Canada International Workshop, Vancouver (CD), September 28, 2002 [No. 81] Pervaiz, M. and Sain, M. “Sheet Molded Natural Fiber Composite For Automotive Applications” Proc. Japan-Canada International Workshop, Vancouver, (CD) September 28, 2002 [No. 80] Lin, W.S. and Sain, M. “Effects of Long-term Stress and Aging on Mechanical Performance of Wood Fiber Filled Polyolefin Decking Composites” Proc. 7th Toronto Conference on Progress in Woodfiber-Plastic Composites, Toronto, ON, May 23-24, 2002 [No. 79] Pervaiz, M. and Sain, M.M. “Sheet Molded Polyolefin Natural Fiber Composites for Automotive Applications” Proc. Automotive TPO Global Conference, Detroit, USA, October 2, 2002 [No. 78] Valton, E., Sain, M., and Schidtheauser, J. “Performance of Cationic Imides in Wet end Papermaking” Proc. C anadian Chemical Engineering Annual Conf., Oct. 20-23, 2002 [No. 77] Pervaiz, M. and Sain, M. “Manufacturing Sheet Molded Natural Fiber Composite For Automotive Applications” Proc. 7th Toronto Conference on Progress in Woodfiber-Plastic Composites, Toronto, ON, May 23-24, 2002 [No. 76] Mehta, A., Sain, M., Ni, Y., and Morneau, D. “Bioenezyme in Dissolved Air Flotation of Paper Mill Effluent” Proc. Int. Environmental Conf., Montreal, April 7-10, 2002 [No. 75] Rouison, D., Sain, M., and Schmidheuser, J. “Surface Sizing of Wood Pulp with SMA” Paptac Int. Conf. & Exhibit, Montreal, January, 2002 [No. 74] Zhang, V. and Sain, M. “Microtoxicity Evaluation of Woodbarks” Proc. Int. Environmental Conf., Montreal, 2002 [No. 73]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Babineau, K., Sain, M., and Ni, Y. “Anionic Trash Quantification in BTCMP Process” Paptac Altantic Meeting, Fredericton, NB, May, 2001 [No. 72] Sain, M.M. “Analysis of Effects of Long Term Stress and Aging on Mechanical Performance of Discontinuous Natural Fiber-polymer Composites” Proc. Cancom, pp.335-339, Montreal, August, 2001 [No. 71] Diamond, M., Sain, M.M., and Daneault, C. “Porous Zeolite in Filled Papermaking and White Water Recirculation Process” Cincinnati, Oh, (CD), April 12-14, 2001 [No. 70] Raymond, A. and Sain, M. “Modeling of Filled Papermaking Process” Tappi Papermaking Conference, Cincinnati, Oh, April 12-14, 2001 [No. 69] Sain, M., Diamond, M., and Daneault, C. “Novel Zeolite Fillers for Fresh Water Reduction in Papermaking: Effect on Graded Paper Properties” Tappi Papermakers Conference, Ohio, pp.1-9, March 11-14, 2001 [No. 68] Sain, M. and Morneau, D. “Quantification of Lint and Offsetting Linting Exacerbation Effects of Fines in Paper Products” UofT, Toronto, ON. and LPM Technology, PQ, Paptac Midwest Branch Annual Meeting and Trade Show, Thunder bay, September 26-28, 2001 [No. 67] Sain, M. “Creep Performance of Polyolefin Composites” Commingled Plastic & Composites Int.Workshop, Trois-Rivieres, May 1-2, 2001 [No. 66]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Leduc, C., Sain, M.M., and Daneault, C. “Use of New Oxidizing Agents (Peroxide-activated Peroxide-perborate) for The Bleaching of Mechanical Pulp” 86e Congrès annuel-Paptac, pp.C83-C88, février 3, 2000 [No. 65] Leduc, C., Bourassa, C., Sain, M., and Daneault, C. “Wood Fiber Refining for Improved Performance” Proc. Paptac Annual meeting, Book 3:C83-C88, Montreal, 2000 [No. 64]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Bao, Y.Q., Sain, M.M., and Robert, S. “Spectroscopy and Electrophoresis in Evalution of Retention and Loss of Modified Starch” CPPA, Montreal, pp.A56-A57, January, 1999 [No. 63] Laroche, H., Sain, M., Daneault, C., and Houtman, C. “Polyoxometalates in Electrochemical Bleaching” CPPA, Montreal, January, 1999 [No. 62] Laroche, H., Sain, M.M., Houtman, C., and Daneault, C. “Electrochemistry, a Viable Delignification and Leaching Technology for the Next Millennium?” 85e Congrès Annuel, Paptac, Montréal, pp.A49-A52, janvier 25- 29, 1999 [No. 61] Bourassa, C., Sain, M.M., and Daneault, C. “Porous Fillers in Papermaking” 85e Congrès Annuel, Paptac, Montréal, janvier 25-29, 1999 [No. 60] Bourassa, C., Diamond, M., Sain, M., and Daneault, C. “Mill System Closure and Trash Catching Porous Fillers in Papermaking” Tappi International Environmental Conference, vol.3, pp.1013-1019, avril 18-21, 1999 [No. 59] Bourassa, C., Sain, M., and Daneault, C. “Role of Porous Filler in Papermaking from TMP and SGW Blends” Tappi Environmental Conf., Nashville, USA, April 19-23, 1999 [No. 58] Leduc, C., Sain, M. and Daneault, C. “Peroxide-activated Peroxide-perborate: Which One to Use and Where to Add It in The Bleaching of Mechanical Pulp” Mechanical and Chemimechanical Pulps Network-Centres d’Excellence, avril 9-10, 1999 [No. 57] Sain, M., Prasakis, J., Daneault, C., and Rivard, J. “Metal Management and Bleaching of TMP & DIP Using Alternative Chelating and Peroxide Stabilizing Agents” Dequest Pulp and Paper Industry Forum, February 25, 1999 [No. 56] Hu, Q.Y., Sain, M.M., and Daneault, C. “Catalytic Bleaching of Mechanical Pulp” 85e Congrès Annuel, Paptac, Montréal, janvier 25-29, 1999 [No. 55] Hu, Q., Sain, M.M., and Daneault, C. “Study on Catalytic Peroxide Brightening of TMP” Colloque du Centre multiregional de recherche en foresterie de l’Université du Québec/Université du Québec à Chicoutimi, août 26-27, 1999 [No. 54] Diamond, M., Sain, M., and Daneault, C. “L’Effet d’une Charge Poreuse sur la Recirculation de l’Eau” 67e Congrès de l’Acfas, Université d’Ottawa, mai 10-14, 1999 [No. 53]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Leduc, C., Sain, M. and Daneault, C. “Le Perborate de Sodium: Une Solution Efficace pour le Lanchiment des Pâtes Mécaniques de Notre Industrie” Conférence Technologique Estivale, Québec, pp.1-5, juin 3-5, 1998 [No. 52] Leduc, C., Sain, M.M. and Daneault, C. “Sodium Perborate:An Alternative for The In-Refiner Bleaching of Mechanical Pulp” Mechanical and Chemimechanical Pulps Network Poster Session, 84ième Congrès annuel ACPP, Montréal, pp.471-476, janvier 26-30, 1998 [No. 51] Sain, M.M., Grondin, G., and Daneault, C. “Zeolite Microparticle in DIP Brightening and its Effect on System Closure” Mechanical and Chemimechanical Pulps Network Poster Session, 84ième Congrès annuel ACPP, Montréal, pp.A293-297, janvier 26-30, 1998 [No. 50] Bourassa, C., Sain, M.M., and Daneault, C. “Trash Catching Porous Filler in Papermaking” CPPA Midwest Conf., annual meeting, Thunder Bay, Canada, October 22-25, 1998 [No. 49] Sain, M.M., Grondin, G., and Daneault, C. , “Zeolite Microparticles in Flotation Deinking and Its Effect on System Closure” Congres annuel-Section Technique, ACPP, 84e, Montreal, Qc, pp.A293-A297, janvier 27-31, 1998 [No. 48] Bourassa, C., Sain, M., and Daneault, C. “Trash Catching Porous Fillers in Value-added Grades for Improved Retention and System Closure” CPPA Midwest Branch Meeting, Thunder Bay, Ontario, September 23-25, 1998 [No. 47]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Khunova, V. and Sain, M.M. “Polyolefin-Magnesium Hydroxide Composites” Eurofiller Conf, Manchester, UK, September 15-19, 1997 [No. 46] Khunova, V. Sain, M.M., and Balatinecz, J. “Reinforced Composites: How do Modal Distribution and Interfaces Govern the Rheological Properties?” Proc. Antec, Toronto, May 28, 1997 [No. 45] Sain, M.M. and Balatinecz, J. “Influence of Recycling on Woodfiber-Plastic Composites” IUPAC conf. Prague, July, 1997 [No. 44] Khunova, V., Sain, M.M., and Bustinova, A. “Recent Advancement on Reactive Processing of Polyolefin-woodfiber Composites” Eurofiller, England, September, 1997 [No. 43] Leduc, C., Sain, M.M., Daneault, C., Lanouette, R., and Valade, J.L. “Peroxide Activated Peroxide-perborate Which One to Use and Where to Add It in The Bleaching of Mechanical Pulp” Tappi Proceeding, Pulping Conference, San Francisco, USA, pp.471-476, Oct.19-23, 1997 [No. 42] Leduc, C., Sain, M.M., Daneault, C., Lanouette, R., and Valade, J.L. “Use of New Oxidizing Agents (Peroxide, Perborate, Activated Peroxide) in The Refiner: A Route to High Brightness Pulp” International Mechanical Pulping Conference, Stockholm, Sweden, pp.63-71, June 9-13, 1997 [No. 41] Chabot, B., Daneault, C., and Sain, M.M. “On the Adverse Role of Fibres During the Flotation of Flexographic Inks” ISWPC, Montreal, pp.18.1-18.4, June 9-12, 1997 [No. 40] Rivard, J., Sain, M.M., Leduc, C., and Daneault, C. “Role of Zeolite in Bleaching and Its Influence on Fine Retention, Wastewater Quality and Paper Properties” ISWPC, Montreal, pp.4.1-4.4, June 9-12, 1997 [No. 39] Hu, Q.Y., Sain, M.M., and Daneault, C. “Catalytic Electrochemical Process to Produce Semi-bleached Kraft Pulp” ISWPC, Montreal, pp.123.1-123.4, June 9-12, 1997 [No. 38] Daneault, C., Sain, M.M., and Leduc, C. “Perborate” US Borax Boron Symposium, Rothbury, MI, aout 4-7, 1997 [No. 37] Chabot, B., Daneault, C., Sain, M.M., and Dorris, G. “The Adverse Role of Fibres During Flotation of Flexographic Inks” 83nd CPPA Annual Meeting, Montreal, January 28, 1997 [No. 36] Sain, M.M., Daneault, C., and Grondin, G. “The Modified Zeolite in Waste Paper Recycling” 83nd CPPA Annual Meeting, Montreal, January 31, 1997 [No. 35]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Sain, M.M. and Daneault, C. “Thermo-oxidative Behavior of Plastics with Variable Compatibility to Wood Fiber” Plastic Wood Fiber Conferences, Mississauga, April 29, 1996 [No. 34] Sain, M.M. “Alternate Chelants and Stabilizers in Recycled Pulp Bleaching” Center of Excellence, Canada, Recycling Section, Annual Meeting, Kingston, Canada, May 4, 1996 [No. 33] Sain, M.M. “A Comparison Between Preoxide Prebleaching and Postbleaching Sequence of ONP with Alternative Chelating Agent” 82nd CPPA Annual Meeting, Montreal, February 1, 1996 [No. 32] Sain, M., Rivard, J., and Daneault, C. “Alternative Chelants and Stabilizers for TMP” Center of Excellence, Bleaching section, Poster session, Canada, January 31, 1996 [No.31] Sain, M.M. and Daneault, C. “New Bleaching Approach of Recycled Pulp” Workshop on Waste Paper Recycling, McGill University, Industry-University Programme, Center of Excellence, September 27, 1996 [No. 30] Sain, M.M. “Nouvelles Alternatives au DTPA et au Silicate de Sodium dans le Blanchiment des Pates Mécaniques” Concour des Papier Techniques, ACPP, Trois-Rivieres, mars 21, 1996 [No. 29] Tremblay, E., Sain, M., Lapointe, M., and Daneault, C. “Détachment et Séparation des Encres à Impression Xerographics de Vieux Papiers” Congress de l’ACFAS, 64e, Universite McGill, Montreal, mai 13-17, 1996 [No. 28] Sain, M.M. and Daneault, C. “New Alternatives to Deinked Pulp Bleaching” Industrial Workshop, Center of Excellence, Mechanical and Chemi-mechanical Pulping Network, McGill University, September 27, 1996 [No. 27] Sain, M.M. and Daneault, C. “Prebleaching and Postbleaching of ONP with Alternative Chemicals” Chances and Limitations, CPPA Annual Meeting, Montreal, Jan. 30-Feb.1, 1996 [No. 26] Khunova, V. and Sain, M.M. “Useful Products from Commodity Plastics” Proc. ICCE International Conference, New Orleans, USA, July 25-27, 1996 [No. 25]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Sain, M.M., Marchildon, L., Lapointe, M., and Daneault, C. “A New Approach to Flotation Deinking of Offset, Flexo and Xerographic Paper Wastes and their Mixtures” International Wastepaper Technology Conference, 4th, London Gatwick, Royaume Uni, pp.1-15, June 13-15, 1995 [No. 24] Sain, M.M., Daneault, C., Leduc, C., and Prasakis, J. “Metal Management and Bleaching of TMP Using Alternative Chelants” Workshop on Bleaching of Mechanical Pulp, University of Toronto, Industry-University Programme, Center of Excellence, December 7, 1995 [No. 23] Daneault, C., Sain, M.M., and Lavoie, C. “Ozone Activated Hydrophobization of Modified Wood Pulp” Int. Chemical Congress of Pacific Basin Societies, Honolulu, Hawaii, 17-22, Poster Session, 1995 [No. 22] Pedneault, C., Sain, M.M., Marchildon, L. and Daneault, C. “Infra-red Drying of Newprint: Mofied Model and Pilot Plant Verification” Concour des papier techniques, ACPP, Trois-Rivieres, mars 21, 1995 [No. 21] Marchildon, L., Pedneault, C., Sain, M.M., Daneault, C. and Robert, S. “Spectroscopic Measurement of Moisture in Paper” Conf. Gas Metro, UQTR, Trois-Rivieres, August 15, 1995 [No. 20] Bao, Y., Sain, M.M. and Robert, S. “Spectroscopic and Electrophoretic Methods to Determine Retention and Loss of Modified Starch” Paptac Annual Meeting, Book A: A53-57, Montreal, 1995 [No. 19] Sain, M.M., Marchildon, L. and Daneult, C. “Novel Process for Deinking Waste Paper Printed with Flexographic and Xerographic Ink Mixtures” PIRA Int. Conf.(Birmingham), UK., June, 1995 [No. 18] Sain, M.M., Chabot, B., Daneault, C. and Dorris, G. “Flotability of the Flexo-Ink” CPAA Presentation, Montreal, Canada, January 30, 1995 [No. 17]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Pednault, C., Sain, M.M., Roberts, S., and Daneault, C. “Paper Drying Mechanism and FT-IR Spectroscopy” Premier Award on 6e Colloque annuel des etudiants en Chimie, Sherbrooke, Quebec, Canada, October, 1994 [No. 16] Pednault, C., Marchildon, L., Daneault, C., Sain, M.M., and Roberts, S. “Le Séchage du Papier Journal par des Radiant Infrarouge au Gaz” Concours des Papiers Techniques del’ACPP, Trois-Riviers, Canada, mars 24, 1994 [No. 15] Pedneault, C., Sain, M.M., Marchildon, L., Daneault, C., and Robert, S. “Analysis of The Drying Efficiency in IR Drying in Relation to Drying Mechanism” Proc. Conf. Technologique Estivale, pp.69-75, Pt. du Pic, Quebec, 1994 [No. 14]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Sain, M.M., Kokta., B.V. and Imbert, C. “Response Surface Methodology, A Useful Tool for Optimization of Molecular Adhesion and Mechanical Properties of Composites” Proc. Cancom, Ottawa, September 29-30, 1993 [No. 13] Sain, M.M. and Kokta, B.V. “Characterization of Molecular Interaction in Composites by FT-IR and ESCA Methods” ANTEC, New Orleans, Proc., pp.320, May 10-14, 1993 [No. 12]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Sain, M.M. and Kokta, B.V. “Performance of Bismaleimide Treated Explosion Pulp Fiber as Reinforcement in Polypropylene Composites” Proc. 7thEuropean Conf on Biomass for Energy and Environment, Agriculture and Industry, Florence, Italy, October 5-9, 1992 [No. 11] Sain, M.M. and Kokta, B.V. “Role of On-process Crosslinkable Thermosets as Filler Coating Components for Filled Thermoplastic Composites” Proc. PPS conf., Knoxville, USA, October 19-21, 1992 [No. 10]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Sain, M.M., Khunova, V., and Beniska, J. “Structure-property Relationship in Filled Crosslinked NR-PP Blends” Proc. 7th IUPAC Conf. on Modification of Polymers, pp.34-35, Czechoslovakia, 1988 [No. 9] Khunova, V., Sain, M.M. and Kozankova, J. “Contribution to Polymer-filler Interactions in PP Composite” Proc. 7th IUPAC Conf. on Modification of Polymers, pp.151-152, Czechoslovakia. 1988 [No. 8] Sain, M.M., Beniska, J., Spirk, E., and Rosner, P. “Technically Compatible Natural Rubber-polyolefin Blends” Proc. Int. Rubber Conf. Interguma, pp.159-166, Czechoslovakia, 1988 [No. 7] Sain, M.M. and Beniska, J. “Few Problems on Developments of Chemistry and Technology of Rubber” Proc. Int. Rubber Conf. Intergum, pp.22-33, Czechoslovakia, 1988 [No. 6] Sain, M.M., Simek, I., Beniska, J., and Spirk, E. “Stabilization of NR-polyolefin Blends” Proc. Sci. Conf. of SVS, pp.34, Czechoslovakia, 1988 [No. 5]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Sain, M.M., Beniska, J., Rosner, P., and Spirk, E. “Studies on Natural Rubber and Ethylene-propylene Block Copolymer Blend” Proc. Int. Conf, on Modification of Polymers pp.130, Czechoslovakia, 1987 [No. 4] Spirk, E., Bartus, J., Hanzlik, S., Khunova, V., and Sain, M.M. “Properties of Modified NBR-PVC Blends” Proc.Int.Conf. on Modification of Polymer, pp.142-43, Czechoslovakia, 1987 [No. 3]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Tikku, V.T., Sain, M.M. and Pradhan, N.K. “Special Cable Compound and Fire Hazard Problems” Proc. National Conf. RDSO, pp.56-58, Czechoslovakia, 1985 [No. 2]
Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!

*********************************************************************************************************************************************** Sain, M.M. and Guha, D.K. “Diffusivity of Moisture in Coagulated Natural Rubber Slab” Proc. Conf. IICHEI, pp.47-49, Puna, India, 1983 [No. 1]