Development of high bio‐content polypropylene composites with different industrial lignins
September 2018 – Polym Adv Technol. (2018), pp. 1-9
Otavio Augusto Titton Dias, Mohini Sain, Ivana Cesarino, Alcides Lopes Leão
DOI: 10.1002/pat.4444
August 2018 – Cellulose (2018), pp. 1-19
Bo Sun, Weijun Wang, Min Zhang, Mohini Sain.
DOI: 10.1007/s10570-018-1976-z
Improvement of stability of tea polyphenols: a review.
August 2018 – Current Pharmaceutical Design, online
Bo Sun, Weijun Wang, Zhibin He, Min Zhang, Fangong Kong, Mohini Sain, Yonghao Ni.
DOI: 10.2174/1381612824666180810160321
The effect of tannic acids on the electrical conductivity of PEDOT:PSS Films
August 2018 – Applied Surface Science, 448, pp. 583-588
Zhihui Yi, Yongbiao Zhao, Peicheng Li, Kevin Ho, Nykola Blozowski, Gilbert Walker, Shaffiq Jaffer, Jimi Tjong, Mohini Sain, Zhenghong Lu.
DOI: 10.1016/j.apsusc.2018.04.168
Use of sulfated cellulose nanocrystals towards stability enhancement of gelatin-encapsulated tea polyphenols
July 2018 – Cellulose 25(9), pp. 5157-5173
Bo Sun, Min Zhang, Yonghao Ni
DOI: 10.1007/s10570-018-1918-9
Preparation and characterization of biobased microspheres from lignin sources
July 2018 – Industrial Crops and Products, 117, pp. 58-65
Javad Sameni, Sally Krigstin, Shaffiq A Jaffer, Mohini Sain.
DOI: 10.1016/j.indcrop.2018.02.078
June 2018 – Journal of Elastomers & Plastics, online
Antimo Graziano, Shaffiq Jaffer, Mohini Sain.
DOI: 10.1177/0095244318783806
June 2018 – Composites Science and Technology, 161, pp. 85-91
Numaira Obaid, Mark T Kortschot, Mohini Sain.
DOI: 10.1016/j.compscitech.2018.04.004

Thermal and Physiochemical Characterization of Lignin Extracted from Wheat Straw by Organosolv Process
February 2018 – Journal of Polymers and the Environment, online
Nasim Ramezani, Mohini Sain.
DOI: 10.1007/s10924-018-1199-2


Water Resistant Nanopapers Prepared by Lactic Acid Modified Cellulose Nanofibers
January 2018 – Cellulose 25(1), pp. 259-268
Jatin Sethi, Muhammad Farooq, Sunanda Sain, Mohini Sain, Juho Sirviö, Mirja Illikainen, Kristiina Oksman.
DOI: 10.1007/s10570-017-1540-2


A comparative life cycle assessment based evaluation of greenhouse gas emission and social study: natural fibre versus glass fibre reinforced plastic automotive parts
January 2018 – International Journal of Global Warming, 5(3), pp. 350-369
Masoud Akhshik, Suhara Panthapulakkal, Jimi Tjong, Mohini Sain.
DOI: 10.1504/IJGW.2018.093125


Modeling and Predicting the Stress Relaxation of Composites with Short and Randomly Oriented Fibers
October 2017 – Materials 10(10), 1207
Numaira Obaid, Mark T. Kortschot, Mohini Sain.
DOI: 10.3390/ma10101207
Permeability and Mechanical Property Correlation of Bio based Epoxy Reinforced with Unidirectional Sisal Fiber Mat Through Vacuum Infusion Molding Technique
October 2017 – Polymer Composites 38(10), pp. 2192-2200
Rajkumar Subbiah, , Jimi Tjong, Sanjay K. Nayak, Mohini Sain.
DOI: 10.1002/pc.23797


Industrial-Scale Preparation of Nanocellulose-Reinforced Biocomposites
September 2017 – S.P.E. Plastics Research Online
Pejman Heidarian, Tayebeh Behzad, Keikhosro Karimi, Mohini Sain.
DOI: 10.2417/spepro.006960


Nanocellulose Composites with Enhanced Interfacial Compatibility and Mechanical Properties Using a Hybrid-Toughened Epoxy Matrix
August 2017 – Carbohydrate Polymers 177(1), pp. 249-257
Pei-Yu Kuo, Luizmar de Assis Barros, Ning Yan, Mohini Sain, Yan Qing, Yiqiang Wu.
DOI: 10.1016/j.carbpol.2017.08.091


Life Cycle Assessment and Cost Analysis of Hybrid Fiber-Reinforced Engine Beauty Cover in Comparison with Glass Fiber-Reinforced Counterpart
July 2017 – Environmental Impact Assessment Review 65, pp. 111-117
Masoud Akhshik, Suhara Panthapulakkal, Jimi Tjong, Mohini Sain.
DOI: 10.1016/j.eiar.2017.04.005


Thermal and Dimensional Stability of Injection-Molded Sisal-Glass Fiber Hybrid PP Biocomposites
May 2017 – Journal of Polymers and the Environment, pp. 1-11
K.C. Birat, Jimi Tjong, Shaffiq Jaffer, Mohini Sain.
DOI: 10.1007/s10924-017-1033-2


Topochemistry of Cellulose Nanofibers Resulting from Molecular and Polymer Grafting
May 2017 – Cellulose 24(5), pp. 2139-2152
Mobina Ahmadi, Tayebeh Behzad, Rohollah Bagheri, Mehran Ghiaci, Mohini Sain.
DOI: 10.1007/s10570-017-1254-5


Properties Investigation of Recycled Polylactic Acid Reinforced by Cellulose Nanofibrils Isolated from Bagasse
April 2017 – Polymer Composites
Pejman Heidarian, Tayebeh Behzad, Keikhosro Karimi, Mohini Sain.
DOI: 10.1002/pc.24404


Understanding the Stress Relaxation of Polymers Reinforced with Short Elastic Fibers
April 2017 – Materials 10(5), 472
Numaira Obaid, Mark T. Kortschot, Mohini Sain.
DOI: 10.3390/ma10050472


Thermal and Dynamic Mechanical Properties of Cellulose Nanofibers Reinforced Epoxy Composites
March 2017 – Journal of Applied Polymer Science 102, pp. 822-828
Naheed Saba, Ahmed Safwan, Muhammed Lamin Sanyang, F. Mohammad, Muhammad Pervaiz, Mohammad Jawaid, Othman Y. Alothman, Mohini Sain.
DOI: doi.org/10.1016/j.ijbiomac.2017.04.074


Model Development for Work of Fracture of Hybrid Composites
March 2017 – Journal of Polymer Science 134(25), 44711
Hamideh Hajiha, Mohini Sain.
DOI: 10.1002/app.44711


Numerical and Experimental Validation of Natural Fiber Orientation in Viscous Fluid of Injection Cavity
February 2017 – Journal of Natural Fibers 14(5), pp. 634-644
K. Rajasekaran, Jimi Tjong, Sanjay K. Nayak, Mohini Sain.
DOI: 10.1080/15440478.2016.1266290


Effect of Alkyl Phenol from Cashew Nutshell Liquid and Sisal Fiber Reinforcement on Dry Sliding Wear Behavior of Epoxy Resin
February 2017 – Journal of Natural Fibers 14(5), pp. 747-758
Rajesh Panda, Jimi Tjong, Sanjay K. Nayak, Mohini Sain.
DOI: 10.1080/15440478.2017.1279100


Biosynthesis, Microstructural Characterisations and Investigation of In-Vitro Mutagenic and Eco-Toxicological Response of a Novel Microbial Exopolysaccharide Based Biopolymer
February 2017 – Journal of Polymers and the Environment, pp. 1-10
Sanchita Bandyopadhyay-Ghosh, Subrata Bandhu Ghosh, Arturo Rodriguez, Mohini Sain.
DOI: 10.1007/s10924-016-0925-x


Enhanced Properties of Poly(ethylene oxide)/Cellulose Nanofiber Biocomposites
February 2017 – Cellulose 24(2), pp. 755-767
Fatemeh Safdari, Pierre J. Carreau, Marie-Claude Heuzey, Musa R. Kamal, Mohini Sain.
DOI: 10.1007/s10570-016-1137-1


Mechanical, Morphological and Structural Properties of Cellulose Nanofibers Reinforced Epoxy Composites
January 2017 – International Journal of Biological Macromolecules 97, pp. 190-200
Naheed Saba, F. Mohammad, Muhammad Pervaiz, Mohammad Jawaid, Othman Y. Alothman, Mohini Sain.
DOI: 10.1016/j.ijbiomac.2017.01.029


Solubility of Lignin and Acetylated Lignin in Organic Solvents
January 2017 – Bioresources 12(1), pp. 1548-1565
Javad Sameni, Sally Krigstin, Mohini Sain.
DOI: 10.15376/biores.12.1.1548-1565


Polyamides: Developments and Applications Towards Next-Generation Engineered Plastics
2017 – Current Organic Synthesis 14(2), pp. 146-155
Muhammad Pervaiz, Mohammad Faruq, Mohammad Jawaid, Mohini Sain.
DOI: 10.2174/1570179413666160831112159


Polylactic acid/polyurethane blend reinforced with cellulose nanocrystals with semi-interpenetrating polymer network (S-IPN) structure
January 2017 – European Polymer Journal 86, pp. 188-199
Jatin Sethi, Mirja Illikainen, Mohini Sain, Kristiina Oksman.
DOI: 10.1016/j.eurpolymj.2016.11.031


Effect of Natural Fiber Network on Permeability and Tensile Strength of Composites Through Vacuum Infusion Process
2017 – Journal of Natural Fibers 14(2), pp. 278-286
Rajkumar Subbiah, Jimi Tjong, Sanjay K. Nayak, Mohini Sain.
DOI: 10.1080/15440478.2016.1193092


Mechanical Properties and Cross-Linking Density of Short Sisal Fiber Reinforced Silicone Composites
November 2016 – BioResources 12(1), pp. 211-227
Rajeshekaran Karthikeyan, Jimi Tjong, Sanjay K. Nayak, Mohini Sain.
DOI: 10.15376/biores.12.1.211-227
Characterization of Lignins Isolated from Industrial Residues and their Beneficial Uses
August 2016 – Bioresources 11(4), pp. 8435-8456
Javad Sameni, Sally Krigstin, Mohini Sain.
DOI: 10.15376/biores.11.4.8435-8456


Sustainable and Lightweight Biopolyamide Hybrid Composites for Greener Auto Parts
August 2016 – The Canadian Journal of Chemical Engineering 94(11), pp. 2052-2060
Shaghayegh Armioun, Suhara Panthapulakkal, Johannes Scheel, Mohini Sain, Jimi Tjong.
DOI: 10.1002/cjce.22609


Dispersion and Reinforcing Effect of Carrot Nanofibers on Biopolyurethane Foams
August 2016 – Materials & Design 110, pp. 526-531
Yvonne Aitomäki, Linn Berglund, Nikolina Frisk, Shiyu Geng, Kristiina Oksman, Mohini Sain, Jatin Sethi, Xiaojian Zhou.
DOI: 10.1016/j.matdes.2016.08.033


Preliminary Design and Experimental Investigation of a Novel Pneumatic Conveying Method to Disperse Natural Fibers in Thermoset Polymers
July 2016 – Materials 9(7), pp. 548
Mahi Fahimian, Mark T. Kortschot, Mohini Sain.
DOI: 10.3390/ma9070548


Grinding Process for the Production of Nanofibrillated Cellulose Based on Unbleached and Bleached Bamboo Organosolv Pulp
July 2016 – Cellulose 23(5), pp. 2971-2987
Viviane da Costa Correia, Valdemir Santos, Mohini Sain, Sergio Francisco Santos, Alcides Leao, Holmer Savastano Jr.
DOI: 10.1007/s10570-016-0996-9


Effect of Long Fiber Thermoplastic Extrusion Process on Fiber Dispersion and Mechanical Properties of Viscose Fiber/Polypropylene Composites
May 2016 – Polymers for Advanced Technologies 27(5), pp. 685-692
Nalini Ranganathan, Kristiina Oksman, Sanjay K. Nayak, Mohini Sain.
DOI: 10.1002/pat.3742


Production of Nanocellulose Fibers from Pinecone Biomass: Evaluation and Optimization of Chemical and Mechanical Treatment Conditions on Mechanical Properties of Nanocellulose Films
May 2016 – Industrial Crops and Products 83, pp. 746-754
N. Rambabu, S. Panthapulakkal, Mohini Sain, A. K. Dalai.
DOI: 10.1016/j.indcrop.2015.11.083


Structure Property Relation of Hybrid Biocomposites Based on Jute, Viscose and Polypropylene: The Effect of the Fibre Content and the Length on the Fracture Toughness and the Fatigue Properties
April 2016 – Composites Part A: Applied Science and Manufacturing 83, pp. 169-175
Nalini Ranganathan, Kristiina Oksman, Sanjay K. Nayak, Mohini Sain.
DOI: 10.1016/j.compositesa.2015.10.037


Semi-Rigid Biopolyurethane Foams Based on Palm-Oil Polyol and Reinforced with Cellulose Nanocrystals
April 2016 – Composites Part A: Applied Science and Manufacturing 83, pp. 56-62
Xiaojian Zhou, Mohini M. Sain, Kristiina Oksman.
DOI: 10.1016/j.compositesa.2015.06.008


Sisal-Glass Fiber Hybrid Biocomposite: Optimization of Injection Molding Parameters Using Taguchi Method for Reducing Shrinkage
April 2016 – Composites Part A: Applied Science and Manufacturing 83, 152-159
K.C. Birat, Omar Faruk, Jose A. M. Agnelli, Alcides Leao, Jimi Tjong, Mohini Sain.
DOI: 10.1016/j.compositesa.2015.10.034


Development of PLA/Cellulosic Fiber Composite Foams Using Injection Molding: Crystallization and Foaming Behaviors
April 2016 – Composites Part A: Applied Science and Manufacturing 83, pp. 130-139
WeiDan Ding, Davoud Jahani, Eunse Chang, Ayse Alemdar, Chul B. Park, Mohini Sain.
DOI: 10.1016/j.compositesa.2015.10.003


Cure Kinetics Characterization of Soy-Based Epoxy Resins for Infusion Molding Process
April 2016 – The Canadian Journal of Chemical Engineering 94(7), pp. 1375-1380
Rajkumar Subbiah, Jimi Tjong, Sanjay K. Nayak, Mohini Sain.
DOI: 10.1002/cjce.22504


Biopolyamide Hybrid Composites for High Performance Applications
March 2016 – Journal of Applied Polymer Science 33(27), 43595
Shaghayegh Armioun, Suhara Panthapulakkal, Johannes Scheel, Jimi Tjong, Mohini Sain.
DOI: 10.1002/app.43595


Impact Toughness, Viscoelastic Behavior, and Morphology of Polypropylene-Jute-Viscose Hybrid Composites
February 2016 – Journal of Applied Polymer Science 133(7), 42981
Nalini Ranganathan, Kristiina Oksman, Sanjay K. Nayak, Mohini Sain.
DOI: 10.1002/app.42981


Effects of Reaction Parameters on the Glycidyl Etherification of Bark Extractives during Bio-epoxy Resin Synthesis
January 2016 – ACS Sustainable Chemistry & Engineering 4(3), pp. 1016-1024
Pei-Yu Kuo, Luizmar de Assis Barros, Mohini Sain, Jimi Tjong, Ning Yang.
DOI: 10.1021/acssuschemeng.5b01098


Emerging Trends in Automotive Lightweighting through Novel Composite Materials
January 2016 – Materials Sciences and Applications 7(1), pp. 26-38
Muhammad Pervaiz, Suhara Panthapulakkal, Mohini Sain, Jimi Tjong.
DOI: 10.4236/msa.2016.71004


Thermal Degradation of Extractive-Based Bio-Epoxy Monomer and Network: Kinetics and Mechanism
January 2016 – Journal of Analytical and Applied Pyrolysis 117, pp. 199-213
Pei-Yu Kuo, Luizmar de Assis Barros, Yuung-Ching Sheen, Mohini Sain, Jimi Tjong, Ning Yan.
DOI: 10.1016/j.jaap.2015.11.014


Soy-Based Polyurethane Spray Foam Insulations for Light Weight Wall Panels and Their Performances Under Monotonic and Static Cyclic Shear Forces
November 2015 – Industrial Crops and Products 74, pp. 1-8
Adel Ramezani Kakroodi, Mustafa Khazabi, Kyle Maynard, Mohini Sain, Oh-Sung Kwon.
DOI: 10.1016/j.indcrop.2015.03.092

Rheology, Thermal Property, and Foaming Behavior of High D-Content Polylactic Acid/Cellulose Nanofiber Composites
October 2015 – RSC Advances 5, pp. 91544-91557
Wei-Dan Ding, Takashi Kuboki, Anson Wong, C.B. Park, Mohini Sain.
DOI: 10.1039/C5RA16901A


Comparison of Bio and Synthetic Polyol on Lignin and Nanocellulose Enhanced Polyurethane Foam for Prototyping Automotive Parts
October 2015 – PU Magazine International 2015(5), pp. 372-377
Omar Faruk, Mohini Sain, Ramin Farnood.
www.researchgate.net/publication/285591267_Comparison_of_bio_and_synthetic_polyol_on_lignin_and_nanocellulose_enhanced_polyurethane_foam_for_prototyping_automotive_parts


Non-Isothermal Crystallization Behaviors of Poly(lactic acid)/Cellulose Nanofiber Composites in the Presence of CO2
October 2015 – European Polymer Journal 71, pp. 231-247
Wei-Dan Ding, Raymond K.M. Chu, Lun Howe Mark, C.B. Park, Mohini Sain.
DOI: 10.1016/j.eurpolymj.2015.07.054


Hybrid Biocomposites with Enhanced Thermal and Mechanical Properties for Structural Applications
September 2015 – Journal of Applied Polymer Science 132(34), 42452K.C. Birat, Suhara Panthapulakkal, Andrrei Kronka, Jose Augusto M. Agnelli, Jimi Tjong, Mohini Sain.

DOI: 10.1002/app.42621


Cellulose Nanofibers from the Skin of Beavertail Cactus, Opuntia Basilaris, as Reinforcements for Polyvinyl Alcohol
September 2015 – Journal of Applied Polymer Science 132(36), 42499
Adel Ramezani Kakroodi, Suhara Panthapulakkal, Mohini Sain, Abdullah M. Asiri.
DOI: 10.1002/app.42499


Studies on Permeability of Sisal Fibre Mat During Thermoset Resin Filling in Vacuum Infusion Process
August 2015 – The Canadian Journal of Chemical Engineering 93(8), pp. 1364-1370
Rajkumar Subbiah, Jimi Tjong, Sanjay K. Nayak, Mohini Sain.
DOI: 10.1002/cjce.22228


Effect of Common Chemical Treatments on the Process Kinetics and Mechanical Properties of Flax/Epoxy Composites Manufactured by Resin Infusion
June 2015 – Journal of Polymers and the Environment 23(2), pp. 143-155Steven Phillips, Pei-Yu Kuo, Cristian Demaria, Larry Lessard, Mohini Sain, Pascal Hubert.

DOI: 10.1007/s10924-015-0709-8


Recycling of Paper Mill Biosolids: A Review on Current Practices and Emerging Biorefinery Initiatives
June 2015 – Clean Soil Air Water 43(6), pp. 919-926
Muhammad Pervaiz, Mohini Sain.
DOI: 10.1002/clen.201400590


Effect of Alkyl Phenol from Cashew Nutshell Liquid on Mechanical and Dry Sliding Wear Behavior of Epoxy Resin
May 2015 – Bioresources 10(3), pp. 4126-4136
Rajesh Panda, Jimi Tjong, Sanjay K. Nayak, Mohini Sain.
ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_10_3_4126_Panda_Alkyl_Phenol_Cashew_Nutshell/3564


Wetting Behavior of Soy-Based Resin and Unsaturated Polyester on Surface-Modified Sisal Fiber Mat
May 2015 – Journal of Reinforced Plastics and Composites 34(10), pp. 807-818
Rajkumar Subbiah, Jimi Tjong, Sanjay K. Nayak, Mohini Sain.
DOI: 10.1177/0731684415580630


High Toughness Hybrid Biocomposite Process Optimization
May 2015 – Composites Science and Technology 111, pp. 44-49
Hamideh Hajiha, Mohini Sain.
DOI: 10.1016/j.compscitech.2015.03.002


Potential Application of Ganoderma Lucidum in Solid State Fermentation of Primary Sludge and Wheat Straw
April 2015 – Bioresources 10(2), pp. 3197-3209

João Paulo Furlan de Jesus, Mohini Sain, Robert Jeng, Djanira Rodrigues Negrão, Alcides Lopes Leao, Meire Cristina Nogueira de Andrade, Marli Teixeira de Almeida Minhoni, .

DOI: 10.15376/biores.10.2.3197-3209


The role of nanoclay formations and wood fiber levels on central composite designed polyethylene composites
April 2015 – Journal of Composite Materials 49(9), pp. 1127 – 1139
Ruijun Gu, Mohini Sain, Bohuslav V Kokta, Kwei-Nam Law.
DOI: https://doi.org/10.1177/0021998314531034


Morphological and Thermo-Mechanical Characterization of Open-Cell Spray Polyurethane Foamed Wall Insulation Modified With Cellulose Fiber
March 2015 – Advances in Petroleum Exploration and Development, 9(1), pp. 13-21
Mustafa Khazabi, Mohini Sain.
DOI:10.3968/6319


Effect of Preparation Parameters on the Formation of Lignin Acetate Microspheres
February 2015 – International Journal of Engineering and Innovative Technology 4(8), pp. 102-113
Javad Sameni, Sally Krigstin, Mohini Sain.
www.ijeit.com/Vol%204/Issue%208/IJEIT1412201502_17.pdf


Evaluation of Wood Composite Additives in the Mechanical Property Changes of PE Blends
February 2015 – Polymer Composites 36(2), pp. 287-293
Ruijun Gu, Mohini Sain, Bohuslav Kokta.
DOI: 10.1002/pc.22942


Bark Depolymerization During Submerged Fermentation Using Monofloral Honey, a Natural Mediator Substitute, and Integration Between Laccases vs. Bark Biopoly-mers, Characterized by Py-GC-MS
January 2015 – RSC Advances 5, pp. 14937-14952
M. Ferhan, N. Yan, Mohini Sain.
DOI: 10.1039/C4RA13841D


Alkaline Extraction of Xylan from Wood Using Microwave and Conventional Heating
January 2015 – Journal of Applied Polymer Science 132(4), 41330
Suhara Panthapulakkal, Don Kirk, Mohini Sain.
DOI: 10.1002/app.41330


Regenerated Cellulose Fibers as Impact Modifier in Long Jute Fiber Reinforced Polypropylene Composites: Effect on Mechanical Properties, Morphology, and Fiber Breakage
January 2015 – Journal of Applied Polymer Science 132(3), 41301
Nalini Ranganathan, Kristiina Oksman, Sanjay K. Nayak, Mohini Sain.
DOI: 10.1002/app.41301


Investigating the Mechanical Response of Soy-Based Polyurethane Foams with Glass Fibers Under Compression at Various Rates
January 2015 – Cellular Polymers 34(6), pp. 281-298
Numaira Obaid, Mark T. Kortschot, Mohini Sain.
www.researchgate.net/publication/285186419_Investigating_the_Mechanical_Response_of_Soy-Based_Polyurethane_Foams_With_Glass_Fibers_Under_Compression_at_Various_Rates


Review of Non-Newtonian Mathematical Models for Rheological Characteristics of Viscoelastic Composites
January 2015 – Green and Sustainable Chemistry 5(1), pp. 6-14
Robenson Cherizol, Mohini Sain, Jimi Tjong.
DOI: 10.4236/gsc.2015.51002


Evaluation of the Influence of Fibre Aspect Ratio and Fibre Content on the Rheological Characteristic of High Yield Pulp Fibre Reinforced Polyamide 11 “HYP/PA11” Green Composite
January 2015 – Open Journal of Polymer Chemistry 5(1), pp. 1-8
Robenson Cherizol, Mohini Sain, Jimi Tjong.
DOI: 10.4236/ojpchem.2015.51001


Modeling the Rheological Characteristics of Flexible High-Yield Pulp-Fibre-Reinforced Bio-Based Nylon 11 Bio-Composite
January 2015 – Journal of Encapsulation and Adsorption Sciences 5(1), pp. 1-10
Robenson Cherizol, Mohini Sain, Jimi Tjong.
DOI: 10.4236/jeas.2015.51001


Novel Bio-Based Polyurethane Spray Foam Insulation for Light Weight Wall Panels and their Performance Under Static Cyclic Shear Forces
January 2015 – Construction and Building Materials
Adel Ramezani Kakroodi, M. Khazabi, Kyle Maynard, Mohini Sain, O.S. Kwon.
www.researchgate.net/publication/266797223_Novel_bio-based_polyurethane_spray_foam_insulation_for_light_weight_wall_panels_and_their_performance_under_static_cyclic_shear_forces


Fragmentation of Lignin from Organosolv Black Liquor by White Rot Fungi
January 2015 – Bioresources 10(1), pp. 1553-1573
Djanira Negrão, Mohini Sain, Alcides Leao, Javad Sameni, Robert Jeng, João Paulo Furlan de Jesus, Regina Teresa Monteiro.
DOI: 10.15376/biores.10.1.1553-1573


Thermorheological and mechanical properties of cellulose reinforced PLA bio-composites
January 2015 – Mechanics of Materials 80(A), 87-95
A. Awalac, M. Ranab, M. Sain.
DOI: https://doi.org/10.1016/j.mechmat.2014.09.009


Effect of mixing conditions on the morphology and performance of fiber-reinforced polyurethane foam
January 2015 – Journal of Cellular Plastics 51(1), pp. 103-119
L.C. Chang, Mohini Sain, Mark T. Kortschot.
DOI: 10.1177/0021955X14545138


Development of Novel Polysaccharide Derived Hybrid Microcellular Biocomposite and Evaluation of Cytotoxicity
November 2014 – Journal of Composite Materials 48(26), pp. 3303-3311
Subrata Bundhu Ghosh, Sanchita Bandyopadhyay-Ghosh, Mohini Sain.
DOI: 10.1177/0021998313509423


Aloe Vera Rind Nanofibers: Effect of Isolation Process on the Tensile Properties of Nanofibre Films
October 2014 – Bioresources 9(4), pp. 7653-7665
Shuna Cheng, Suhara Panthapulakkal, Nasim Ramezani, Abdullah M. Asiri, Mohini Sain.
DOI: 10.15376/biores.9.4.7653-7665


Extrusion of Thermoplastic Starch: Effect of “Green” and Common Polyethylene on the Hydrophobicity Characteristics
October 2014 – Materials Sciences and Applications 5(12), pp. 845-856
Muhammad Pervaiz, Philip Oakley, Mohini Sain.
DOI: 10.4236/msa.2014.512085


Mechanical, Thermal, and Morphological Properties of Nanocomposites Based on Polyvinyl Alcohol and Cellulose Nanofiber from Aloe Vera Rind
September 2014 – Journal of Nanomaterials 2014(2014), 903498
Adel Ramezani Kakroodi, Shuna Cheng, Mohini Sain, and Abdullah Asiri.
DOI: 10.1155/2014/903498


Development of Lignin and Nanocellulose Enhanced Bio PU Foams for Automotive Parts
September 2014 – Journal of Polymers and the Environment 22(3), pp. 279-288
Omar Faruk, Mohini Sain, Ramin Farnood, Yuanfeng Pan, Huining Xiao.
DOI: https://doi.org/10.1007/s10924-013-0631-x


Aloe Vera Rind Cellulose Nanofibers- Reinforced Films
August 2014 – Journal of Polymer Science 131, 40592
Shuna Cheng, Suhara Panthapulakkal, Mohini Sain, Abdullah M. Asiri.
DOI: 10.1002/app.40592


Properties of Nanofibre Reinforced Cement Composites
July 2014 – Construction and Building Materials 63, pp. 119-124
Obinna Onuaguluchi, Daman K. Panesar, Mohini Sain.
DOI: 10.1016/j.conbuildmat.2014.04.072


Synthesis and Characterization of an Extractive-Based Bio-Epoxy Resin from Beetle Infested Pinus Contorta Bark
July 2014 – Green Chemistry 16(7), pp. 3483-3493
Pei-Yu Kuo, Mohini Sain, Ning Yan.
DOI: 10.1039/C4GC00459K


Typical Interactions of Composite Additives with Polyethylene and Nanoclay
June 2014 – Society of Plastics Engineers
Ruijun Gu, Mohini Sain.
DOI: 10.13140/2.1.3788.8643


Covalently Grafted Carbon Nanotube on Bacterial Cellulose Composite for Flexible Touch Screen Application
June 2014 – Materials Letters 107, pp. 247-250
K. O-Rak, S. Ummartyotin, Mohini Sain, Hathaikarn Manuspiya.
DOI: 10.1016/j.matlet.2013.05.126


Preparation of a Cellulose and Water-Based Resin Composite
May 2014 – Materials Letters 123, pp. 70-74
S. Ummartyotin, Mohini Sain.
DOI: 10.1016/j.matlet.2014.01.143


Modification and Characterization of Hemp and Sisal Fibers
April 2014 – Journal of Natural Fibers 11(2), pp. 144-168
Hamideh Hajiha, Mohini Sain, Lucia H. Innocentini-Mei.
DOI: 10.1080/15440478.2013.861779


Development and Characterization of Flexible Epoxy Foam with Reactive Liquid Rubber and Starch
April 2014 – Journal of Materials Science 49(8), pp. 3125-3134
Ruijun Gu, Mohini Sain, Samir Konar.
DOI: 10.1007/s10853-014-8013-x


Comparison of Enzymatic, Alkaline, and UV/H2O2 Treatments for Extraction of Beetle-Infested Lodgepole Pine (BILP) and Aspen Bark Polyphenolic Extractives
February 2014 – ACS Sustainable Chemistry & Engineering 2(2), pp. 165-172
Muhammad Ferhan, Nicolas Tanguy, Ning Yan, Mohini Sain.
DOI: 10.1021/sc400184f


Development of Bacterial Cellulose and Poly(vinylidene Fluoride) Binary Blend System: Structure and Properties
February 2014 – The Chemical Engineering Journal 237, pp. 396-402
K. O-Rak, E. Phakdeepataraphan, Natthaphon Bunnak, S. Ummartyotin, Mohini Sain, Hathaikarn Manuspiya.
www.researchgate.net/publication/263376707_Development_of_bacterial_cellulose_and_polyvinylidene_fluoride_binary_blend_system_Structure_and_properties


Mechanical Response of Hard Bio-Based PU Foams Under Cyclic Quasi-Static Compressive Loading Conditions
February 2014 – International Journal of Fatigue 59, pp. 76-89
Chun Hou, Kazimierz Czubernat, Shun Yi Jin, William Altenhof, Elena Maeva, Inna Seviaryna, Sanchita Bandyopadhay-Ghosh, Mohini Sain, Ruijun Gu.
DOI: 10.1016/j.ijfatigue.2013.09.012


Improvement in Compressive Behavior of Alkali-Treated Wood Fibre-Reinforced Bio-Based Polyurethane Foams
January 2014 – Cellular Polymers 33(3), pp. 139-157
L.C. Chang, Mohini Sain, Mark T. Kortschot.
www.researchgate.net/publication/288405943_Improvement_in_compressive_behavior_of_alkali-treated_wood_fibre-reinforced_bio-based_polyurethane_foams


Development of Novel Wax-enabled Thermoplastic Starch Blends and Their Morphological, Thermal and Environmental Properties
January 2014 – International Journal of Composite Materials 4(5), pp. 204-212
Muhammad Pervaiz, Philip Oakley, Mohini Sain.
DOI: 10.5923/j.cmaterials.20140405.02


Morphological and Physico-Thermal Properties of Soy-Based Open-Cell Spray Polyurethane Foam Insulation Modified with Wood Pulp Fiber
January 2014 – Advances in Petroleum Exploration and Development 7(1), pp. 1-6
M. Khazabi, Mohini Sain.
DOI: 10.3968/j.aped.1925543820140701.1962


Thermal Characteristics of Lignin Residue from Industrial Processes
January 2014 – Bioresources 9(1), pp. 725-737
Javad Sameni, Sally Krigstin, D.S. Rosa, Alcides Leao, Mohini Sain.
DOI: 10.15376/biores.9.1.725-737


Progress Report on Natural Fiber Reinforced Composites
January 2014 – Macromolecular Materials and Engineering 299(1), pp. 9-26
Omar Faruk, Andrzej K. Bledzki, Hans-Peter Fink, Mohini Sain.
DOI: 10.1002/mame.201300008


Morphological and Physico-Thermal Properties of Soy-Based Open-Cell Spray Polyurethane Foam Insulation Modified with Wood Pulp Fiber
January 2014 – Advances in Petroleum Exploration and Development 7(1), pp. 1-6
M. Khazabi, Mohini Sain.
DOI:10.3968/j.aped.1925543820140701.1962


Influence of Cellulose Nanofibers on the Curing Behavior of Epoxy/Amine Systems
December 2013 – European Polymer Journal 49(12), pp. 3778-3787
Pei-Yu Kuo, Ning Yan, Mohini Sain.
DOI: 10.1016/j.eurpolymj.2013.08.022


Microwave Assisted Short-Time Alkaline Extraction of Birch Xylan
December 2013 – Journal of Polymers and the Environment 21(4), pp. 917-929
Suhara Panthapulakkal, Viktoriya Pakharenko, Mohini Sain.
DOI: 10.1007/s10924-013-0591-1


Morphological Changes and Surface Reactions of Wood Fibers in Wood Composites
October 2013 – Journal of Thermoplastic Composite Materials 26(9), pp. 1260-1277
Ruijun Gu, Mohini Sain, Bohuslav Kokta.
DOI: 10.1177/0892705711434951


Characterization of Soda Hardwood Lignin and the Formation of Lignin Fibers by Melt Spinning
September 2013 – Journal of Applied Polymer Science 129(5), pp. 2765-2771
A. Awal, Mohini Sain.
DOI: 10.1002/app.38911


Continuous Extrusion Foaming of Lignin Enhanced Thermoplastic Polyurethane (TPU)
July 2013 – Journal of Biobased Materials and Bioenergy 7(3), pp. 309-314
Omar Faruk, Mohini Sain.
DOI: 10.1166/jbmb.2013.1365


Environmental Ageing Studies of Chemically Modified Micro and Nanofibril Phenol Formaldehyde Composites
July 2013 – Industrial Crops and Products 49, pp. 471-483
Bibin Mathew Cherian, Alcides Leao, Marcia Rodrigues de Morais Chaves, Sivoney Ferreira de Souza, Mohini Sain, Suresh S. Narine.
DOI: 10.1016/j.indcrop.2013.04.033


A New Method for Demethylation of Lignin from Woody Biomass using Biophysical Methods
June 2013 – Chemical Engineering & Process Technology 4(5), 1000160
Muhammad Ferhan, Ning Yan, Mohini Sain.
DOI: 10.4172/2157-7048.1000160


Identification of a Potential Fungal Species by 18S rDNA for Ligninases Production
June 2013 – World Journal of Microbiology and Biotechnology 29, pp. 2437-2440
Muhammad Ferhan, Suikinai Nobre Santos, Itamar Soares de Melo, Suikinai Nobre Santos, Ning Yan, Mohini Sain.
DOI: 10.1007/s11274-013-1398-x


Investigation of Structural Changes of Alkaline – Extracted Wood Using X-Ray Microtomography and X-ray Diffraction: A Comparison of Microwave Versus Conventional Method of Extraction
June 2013 – Journal of Wood Chemistry and Technology 33(2), pp. 92-102
Suhara Panthapulakkal, Mohini Sain.
DOI: 10.1080/02773813.2012.751427


Sequencing and Annotation of the Ophiostoma Ulmi Genome
March 2013 – BMC Genomics 14(1), pp. 162
Shima Khoshraftar, Stacy Hung, Sadia Khan, Yunchen Gong, Vibha Tyagi, John Parkinson, Mohini Sain, Alan M. Moses, Dinesh Christendat.
DOI: 10.1186/1471-2164-14-162


Effects of Wood Fiber and Microclay on the Performance of Soy Based Polyurethane Foams
March 2013 – Journal of Polymers and the Environment 21(1), pp. 30-38
Ruijun Gu, Mohini Sain.
DOI: 10.1007/s10924-012-0538-y


A Feasibility Study of Polyurethane Composite Foam with Added Hardwood Pulp
March 2013 – Industrial Crops and Products 42, pp. 273-279
Ruijun Gu, Mohini Sain, Samir Konar.
DOI: 10.1016/j.indcrop.2012.06.006


Preparation and Characterization of Baked Nitrile Latex Foam Reinforced with Biomasses
March 2013 – Industrial Crops and Products 42, pp. 261-267
Samir Konar, Ruijun Gu, Mohini Sain.
DOI: 10.1016/j.indcrop.2012.05.036


Optimization of Microwave Assisted Alkaline Extraction of Xylan from Birch Wood Using Response Surface Methodology
January 2013 – Journal of Materials Science and Chemical Engineering 1(6), pp. 38-50
Suhara Panthapulakkal, Mohini Sain.
DOI: 10.4236/msce.2013.16006


Isolation of Nano Fibres from Hemp and Flax and Their Thermoplastic Composites
January 2013 – Plastic and Polymer Technology 2(1), pp. 9-16
Suhara Panthapulakkal, Mohini Sain.
www.researchgate.net/publication/263378025_Isolation_of_Nano_Fibres_from_Hemp_and_Flax_and_Their_Thermoplastic_Composites


Preparation and Characterization of Sustainable Polyurethane Foams from Soybean Oils
November 2012 – Journal of American Oil Chemists’ Society 89(11), pp. 2103-2111
Ruijun Gu, Samir Konar, Mohini Sain.
DOI: 10.1007/s11746-012-2109-8


Biocomposites Reinforced with Natural Fibers: 2000-2010
November 2012 – Progress in Polymer Science 37(11), pp. 1552-1596
Omar Faruk, Andrzej K. Bledzki, Hans-Peter Fink, Mohini Sain.
DOI: 10.1016/j.progpolymsci.2012.04.003


Hybrid Organic-Inorganic of ZnS Embedded PVP Nanocomposite Film for Photoluminescent Application
November 2012 – Comptes Rendus Physique 13(9-10), pp. 994-1000
S. Ummartyotin, Natthaphon Bunnak, J. Juntaro, Mohini Sain, Hathaikarn Manuspiya.
DOI: 10.1016/j.crhy.2012.09.008


Ligninases Production and Partial Purification of Mnp from Brazilian Fungal Isolate in Submerged Fermentation
October 2012 – Fermentation Technology 1(5), 1000106
M. Fehran, Alcides Leao, Itamar Soares de Melo, Mohini Sain.
DOI: 10.4172/2167-7972.1000106


Cellulose-Polymer Based Green Composite Fibers by Electrospinning
September 2012 – Journal of Polymers and the Environment 20(3), pp. 690-697
A. Awal, Mohini Sain.
DOI: 10.1007/s10924-012-0428-3


Synthesis of Colloidal Silver Nanoparticles for Printed Electronics
June 2012 – Comptes Rendus Chimie 15(6), pp. 539-544
Sarute Ummartyotin, Natthaphon Bunnak, Julasak Juntaro, Mohini Sain, Hathaikarn Manuspiya.
DOI: 10.1016/j.crci.2012.03.006


High-yield Protein Recovery from Secondary Sludge of Paper Mill Effluent and Its Characterization
May 2012 – Bioresources 7(3), pp. 2933-2947
Muhammad Pervaiz, Mohini Sain.
DOI: 10.15376/biores.7.3.2933-2947


Effect of Bismaleimide Reactive Extrusion on the Crystallinity and Mechanical Performance of Polylactic acid (PLA) Green Composites
May 2012 – Journal of Applied Polymer Science 124(4), pp. 3013-3023
Alexis Baltazar, Mohini Sain.
DOI: 10.1002/app.35331


The Role of Ferrofluid on Surface Smoothness of Bacterial Cellulose Nanocomposite Flexible Display
May 2012 – The Chemical Engineering Journal 193-194, pp. 16-20
Sarute Ummartyotin, J. Juntaro, Mohini Sain, Hathaikarn Manuspiya.
DOI: 10.1016/j.cej.2012.03.074


Use of Primary Sludge from Pulp and Paper Mills for Nanocomposites
May 2012 – Molecular Crystals and Liquid Crystals 556(1), pp. 254-263
Alcides Leao, Bibin Mathew Cherian, Sivoney Ferreira de Souza, Mohini Sain, Suresh S. Narine, Mariana S. Caldeira, Maria Angélica S. Toledo.
DOI: 10.1080/15421406.2012.635974


Thermal Analysis and Spectroscopic Studies of Electrospun Nano-Scale Composite Fibers
March 2012 – Journal of Thermal Analysis and Calorimetry 107(3), pp. 1237-1242
A. Awal, Mohini Sain, Mohammad Chowdhury.
DOI: 10.1007/s10973-011-1875-0


Bacterial Cellulose Reinforced Polyurethane-Based Resin Nanocomposite: A Study of How Ethanol and Processing Pressure Affect Mechanical and Dielectric Properties
March 2012 – Carbohydrate Polymers 87(4), pp. 2464-2469
J. Juntaro, Surate Ummartyotin, Mohini Sain, Hathaikarn Manuspiya.
DOI: 10.1016/j.carbpol.2011.11.020


Extracellular Proteins Produced by Different Species of the Fungus Trichoderma on a Secondary Paper Mill Sludge Substrate
February 2012 – Bioresources 7(1), pp. 1029-1039
Ida Vaskova, Robert Jeng, Vibha Tyagi, Arturo Rodriguez, Mohini Sain.
www.researchgate.net/publication/262800546_Extracellular_Proteins_Produced_by_Different_Species_of_the_Fungus_Trichoderma_on_a_Secondary_Paper_Mill_Sludge_Substrate


Enzymatic Modification of Secondary Sludge by Lipase and Laccase to Improve the Nylon/Sludge Composite Properties
February 2012 – Journal of Reinforced Plastics and Composites 31(3), pp. 179-188
Maryam Edalatmanesh, Mohini Sain, Steven N. Liss.
DOI: 10.1177/0731684411433186


Development of Transparent Bacterial Cellulose Nanocomposite Film as Substrate for Flexible Organic Light Emitting Diode (OLED) Display
January 2012 – Industrial Crops and Products 35(1), pp. 92-97
Surate Ummartyotin, J. Juntaro, Mohini Sain, Hathaikarn Manuspiya.
DOI: 10.1016/j.indcrop.2011.06.025


Synthesis and Luminescence Properties of ZnS and Metal (Mn, Cu)-Doped-ZnS Ceramic Powder
January 2012 – Solid State Sciences 14(3), 299-304
Surate Ummartyotin, Natthaphon Bunnak, J. Juntaro, Mohini Sain, Hathaikarn Manuspiya.
DOI: 10.1016/j.solidstatesciences.2011.12.005


Extraction and Characterization of Extracellular Polymeric Substances (EPS) from Waste Sludge of Pulp and Paper Mill
January 2012 – International Review of Biophysical Chemistry 3(3), PP. 61-65
Muhammad Pervaiz, Mohini Sain.
www.praiseworthyprize.org/jsm/index.php?journal=irebic&page=article&op=view&path%5B%5D=3432


New Developments for Lignocellulosics-Nanocomposites with Low Carbon Footprint
January 2012 – MRS Online Proceeding Library Archive 1386
Alcides Leao, Bibin Mathew Cherian, Sivoney Ferreira de Souza, Mohini Sain, Suresh S. Narine.
DOI: 10.1557/opl.2012.326


Preparation and Characterization of Cellulose Nanofibril Films from Wood Fibre and Their Thermoplastic Polycarbonate Composites
January 2012 – International Journal of Polymer Science (2012), pp. 1687-9422
Suhara Panthapulakkal, Mohini Sain.
DOI: 10.1155/2012/381342


Reinforcement of Soy Polyol Based Rigid Polyurethane Foams by Cellulose Microfibres and Nanoclays
January 2012 – Journal of Applied Polymer Science 124(6), pp. 4702-4710
M. Zhu, Sanchita Bandyopadhyay-Ghosh, M. Khazabi, Jenny H. Cai, C. Correa, Mohini Sain.
DOI: 10.1002/app.35511


Acoustic, Tomographic and Morphological Properties of Bismaleimide-Modified PLA Green Composites
December 2011 – Journal of Reinforced Plastics and Composites 30(16), pp. 1329-1340
Alexis Baltazar, Inna Seviaryna, Mohini Sain, Elena Yu Maeva.
DOI: 10.1177/0731684411415451


Fiber Reinforced Soy-Based Polyurethane Spray Foam Insulation. Part 2: Thermal and Mechanical Properties
November 2011 – Bioresources 6(4), pp. 3775-3790
Ruijun Gu, Mustafa Khazabi, Mohini Sain.
www.researchgate.net/publication/263379813_Fiber_Reinforced_Soy-Based_Polyurethane_Spray_Foam_Insulation_Part_2_Thermal_and_Mechanical_Properties


Mechanical Properties and Morphology of Polylactide Composites with Acrylic Impact Modifier
November 2011 – Journal of Macromolecular Science Part B(11), pp 2070-2083
Xin-Guo Ge, Susan George, Shiang Law, Mohini Sain.
DOI: 10.1080/00222348.2011.557585


Utilization of Secondary Sludge as Filler in Composites: Surface Energy and Final Mechanical Properties
October 2011 – Journal of Reinforced Plastics and Composites 30(10), pp. 864-874
Maryam Edalatmanesh, Mohini Sain, Steven N. Liss.
DOI: 10.1177/0731684411411334


Spectroscopic Studies and Evaluation of Thermorheological Properties of Softwood and Hardwood Lignin
October 2011 – Journal of Applied Science 122(2), pp. 956-963
A. Awal, Mohini Sain.
DOI: 10.1002/app.34211


Bio-Treatment of Natural Fibers in Isolation of Cellulose Nanofibres: Impact of Pre-Refining of Fibers on Bio-Treatment Efficiency and Nanofiber Yield
September 2011 – Journal of Polymers and the Environment 19(3), pp. 615-621
Sreekumar Janardhnan, Mohini Sain.
DOI: 10.1007/s10924-011-0312-6


Fiber Reinforced Soy-Based Polyurethane Spray Foam Insulation. Part 1: Cell Morphologies
August 2011 – Bioresources 6(4), pp. 3757-3774
Mustafa Khazabi, Ruijun Gu, Mohini Sain.
DOI: 10.15376/biores.6.4.3757-3774


The Effect of Dispersed Elastomer Particle Size on Heterogeneous Nucleation of TPO with N 2 foaming
August 2011 – Chemical Engineering Science 66(16), pp. 3675-3686
Seong G. Kim, Siu N. Leung, C.B. Park, Mohini Sain.
DOI: 10.1016/j.ces.2011.05.003


Si–O Barrier Technology for Bacterial Cellulose Nanocomposite Flexible Displays
August 2011 – Carbohydrate Polymers 86(1), pp. 337-342
S. Ummartyotin, J. Juntaro, Mohini Sain, Hathaikarn Manuspiya.
DOI: 10.1016/j.carbpol.2011.04.057


Preparation of Cellulose-Based Nano-Composite Fibers by Electrospinning and Understanding the Effect of Processing Parameters
July 2011 – Composites Part B Engineering 42(5), pp. 1220-1225
A. Awal, Mohini Sain, Mohammad Chowdhury.
DOI: 10.1016/j.compositesb.2011.02.011


Isolation of Cellulose Nanofibers: Effect of Biotreatment on Hydrogen Bonding Network in Wood Fibers
June 2011 – International Journal of Polymer Science 2011(2011), 279610
Sreekumar Janardhnan, Mohini Sain.
DOI: 10.1155/2011/279610


Thermal Characterization and Electrical Properties of Fe-Modified Cellulose Long Fibers and Micro Crystalline Cellulose
June 2011 – Journal of Analysis and Calorimetry 104(3), pp. 841-847
Smith Sundar, Mohini Sain, Kristiina Oksman.
DOI: 10.1007/s10973-011-1338-7


Deposition of PEDOT: PSS Nanoparticles as a Conductive Microlayer Anode in OLEDs Device by Desktop Inkjet Printer
May 2011 – Journal of Nanomaterials 606714(7)
S. Ummartyotin, J. Juntaro, C. Wu, Mohini Sain, Hathaikarn Manuspiya.
DOI: 10.1155/2011/606714


Protein Extraction from Secondary Sludge of Paper Mill Wastewater and Its Utilization as a Wood Adhesive
May 2011 – Bioresources 6(2), pp. 961-970
Muhammad Pervaiz, Mohini Sain.
www.researchgate.net/publication/262800065_Protein_Extraction_from_Secondary_Sludge_of_Paper_Mill_Wastewater_and_Its_Utilization_as_a_Wood_Adhesive


The Effects of Nanoclay on the Extrusion Foaming of Wood Fiber/Polyethylene Nanocomposites
May 2011 – Polymer Engineering and Science 51(5), pp. 1014-1022
Yoon H. Lee, Takashi Kuboki, C.B. Park, Mohini Sain.
DOI: 10.1002/pen.21739


Targeted Disruption of Hydroxyl Chemistry and Crystallinity in Natural Fibers for the Isolation of Cellulose Nano Fibers via Enzymatic Treatment
February 2011 – Bioresources 6(2), pp. 1242-1250
Sreekumar Janardhnan, Mohini Sain.
DOI: 10.15376/biores.6.2.1242-1250


Overview of Biofoams for Lightweight Auto Parts
January 2011 – Chemicke Listy 105(15), pp. 239-240
Mohini Sain.
www.chemicke-listy.cz/docs/full/2011_s3_s235-s240.pdf


Nanocellulose from Curava Fibers and their Nanocomposites
December 2010 – Molecular Crystals and Liquid Crystals 522, pp. 342-352
Sivoney Ferreira de Souza, Alcides Leao, Jenny H. Cai, Crystal Wu, Mohini Sain, Bibin Mathew Cherian.
DOI: 10.1080/15421401003722955


Cellular Biopolymers and Molecular Structure of a Secondary Pulp and Paper Mill Sludge Verified by Spectroscopy and Chemical Extraction Techniques
December 2010 – Water Science & Technology 62(12), pp. 2846-2853
Maryam Edalatmanesh, Mohini Sain, Steven N. Liss.
DOI: 10.2166/wst.2010.068


Performance of Long Canadian Natural Fibers as Reinforcements in Polymers
November 2010 – Journal of Reinforced Plastics and Composites 29(16), pp. 3197-3207
Qingping Guo, Billy Cheng, Mark T. Kortschot, Mohini Sain, Robert Knudson, James Deng, Ayse Alemdar.
DOI: 10.1177/0731684410369722


Enhancing Cell Nucleation of Thermoplastic Polyolefin Foam Blown with Nitrogen
November 2010 – Journal of Applied Polymer Science 118(3), pp. 1691-1703
S.G. Kim, J.W.S. Lee, C.B. Park, Mohini Sain.
DOI: 10.1002/app.32294


The Effects of Clay Dispersion on the Mechanical, Physical, and Flame-Retarding Properties of Wood Fiber/Polyethylene/Clay Nanocomposites
October 2010 – Journal of Applied Polymer Science 118, pp. 452-461
Yoon H. Lee, Marianna Kontopoulou, C.B. Park, Mohini Sain, Takashi Kuboki.
DOI: 10.1002/app.32045


In Vitro Cytotoxicity of Amylose-Based Bioplastic for Packaging Applications
September 2010 – Journal of Polymers and the Environment 18(3), pp. 231-234
Sanchita Bandyopadhay-Ghosh, Robert Jeng, Joydeep Mukherjee, Mohini Sain.
DOI: 10.1007/s10924-010-0192-1


Synthesis of Soy-Polyol by Two Step Continuous Route and Development of Soy-Based Polyurethane Foam
September 2010 – Journal of Polymers and the Environment 18(3), pp. 437-442
Sanchita Bandyopadhay-Ghosh, Subrata Bandhu Ghosh, Mohini Sain.
DOI: 10.1007/s10924-010-0186-z


Dynamic Mechanical Behavior and Thermal Characterization of Biofilms Based on Starch Modified by Fungi Isolates
September 2010 – Journal of Polymers and the Environment 18(3), pp. 430-436
Arturo Rodriguez, Subrata Bandhu-Ghosh, Robert Jeng, Mohini Sain.
DOI: 10.1007/s10924-010-0163-6


Nanoclay Modified Water-Blown Polyurethane Foams Derived from Bifunctional Soybean Oil-Based Polyol
April 2010 – Polymer-Plastics Technology and Engineering 49(7), pp. 701-706
I. Banik, Mohini Sain.
DOI: 10.1080/03602551003749536


Characterization of Microcrystalline Cellulose and Cellulose Long Fiber Modified by Iron Salt
March 2010 – Carbohydrate Polymers 80(1), pp. 35-43
Smith T. Sundar, Mohini Sain, Kristiina Oksman.
DOI: 10.1016/j.carbpol.2009.10.072


Rapid Differentiation of Ophiostoma Ulmi and Ophiostoma Novo-Ulmi Isolates by Matrix-Assisted-Laser-Desorption/Ionization Time-of-Flight/Time-of-Flight Mass Spectrometry
February 2010 – Forest Pathology 40(1), pp. 1-6
Christopher L.H. Huang, Robert Jeng, Mohini Sain, Martin Hubbes, M.T. Dumas.
DOI: 10.1111/j.1439-0329.2009.00597.x


Thermal Properties and Spectral Characterization of Wood Pulp Reinforced Bio-Composite Fibers
February 2010 – Journal of Thermal Analysis and Calorimetry 99(2), pp. 695-701
A. Awal, Subrata Bandhu-Ghosh, Mohini Sain.
DOI: 10.1007/s10973-009-0100-x


Extraction and Characterization of Extracellular Polymeric Substances (EPS) from Waste Sludge of Pulp and Paper Mill
January 2010 – International Review of Biophysical Chemistry 3(3), pp. 61-65
Muhammad Pervaiz, Mohini Sain.
www.praiseworthyprize.org/jsm/index.php?journal=irebic&page=article&op=view&path%5B%5D=3432


Usage of Pulp and Paper Secondary Sludge for Biocomposite Production: FTIR and DSC Analysis
January 2010 – International Review of Chemical Engineering 2(1), pp. 25
Maryam Edalatmanesh, Mohini Sain, Steven N. Liss.
www.researchgate.net/publication/262799802_Usage_of_Pulp_and_Paper_Secondary_Sludge_for_Biocomposite_Production_FTIR_and_DSC_Analysis


Novel Bionanocomposites: Processing, Properties and Potential Applications
December 2009 – Plastics Rubber and Composites 38(9), pp. 396-405
Kristiina Oksman, A.P. Mathew, Mohini Sain.
DOI: 10.1179/146580109X12540995045723


Mechanical Properties and Foaming Behavior of Cellulose Fiber Reinforced High-Density Polyethylene Composites
November 2009 – Polymer Engineering and Science pp. 2179-2188
Takashi Kuboki, Yoon H. Lee, C.B. Park, Mohini Sain.
DOI: 10.1002/pen.21464


Thermal Characterization of Starch-Based Polymers Produced by Ophiostoma Spp
October 2009 – Journal of Thermal Analysis and Calorimetry (98), pp. 317-323
Arturo Rodriguez, Mohini Sain, Robert Jeng.
DOI: 10.1007/s10973-009-0314-y


Cellulose Microfibres: Recent Advances and Future Prospects in Medical Applications
September 2009 – GAK Gummi Fasern Kunststoffe
Sanchita Bandyopadhyay-Ghosh, Mohini Sain.
https://www.researchgate.net/publication/257818873_Cellulose_Microfibres_Recent_Advances_and_Future_Prospects_in_Medical_Applications


Investigation on Correlation Between Protein Content and Moisture Absorption-Desorption Rate of Protein Coating
August 2009 – International Journal of Plastics Technology 13(1), pp. 1-7
Y. Xiong, Robert Jeng, Mohini Sain, P. Diebel, L. Michelle, .
DOI: 10.1007/s12588-009-0001-7


Surface and Interface Characterization of Untreated and SMA Imide-Treated Hemp Fiber/Acrylic Composites
June 2009 – Polymer Composites pp. 681-690
Tayebeh Behzad, Mohini Sain.
DOI: 10.1002/pc.20418


Development and Morphological Characterization of Wood Pulp Reinforced Biocomposite Fibers
June 2009 – Journal of Materials Science (44), pp. 2876-2881
A. Awal, Subrata Bandhu Ghosh, Mohini Sain.
DOI: 10.1007/s10853-009-3380-4


Water-Blown Soy Polyol Based Polyurethane Foams Modified by Cellulosic Materials Obtained from Different Sources
May 2009 – Journal of Applied Polymer Science 112(4), pp. 1974-1987
Indranil Banik, Mohini Sain.
DOI: 10.1002/app.29570


Commercialization of Wheat Straw as Reinforcing Filler for Commodity Thermoplastics
March 2009 – Journal of Natural Fibers 6(1), pp. 83-97
Supriya Mishra, Mohini Sain.
DOI: 10.1080/15440470802703851


The Effect of Decreased Fiber Size in Wheat Straw/Polyvinyl Alcohol Composites
March 2009 – Journal of Biobased Materials and Bioenergy 3(1), pp. 75-80
Ayse Alemdar, Kristiina Oksman, Mohini Sain.
DOI: 10.1166/jbmb.2009.1010


Protein Isolation from Condensed Distilled Soluble of Corn Fermentation
Jan-09
Y. Xiong, Robert Jeng, Mohini Sain.
https://www.researchgate.net/publication/263652855_Protein_isolation_from_condensed_distilled_soluble_of_corn_fermentation


Bio-Refinery Development of Chemical Platforms Across Integrated Biomass Technologies
January 2009 – Polimeros
Mohini Sain.
https://www.researchgate.net/publication/263617492_Bio-refinery_Development_of_chemical_platforms_across_integrated_biomass_technologies


Viscoelastic Properties of Polysaccharides Derived from the Fungal Modification of Native Starch
January 2009 – International Review of Biophysical Chemistry (IREBIC) 1(2), pp. 56-62
Arturo Rodriguez, Mohini Sain, Robert Jeng, Alexis Baltazar.
http://www.praiseworthyprize.org/jsm/index.php?journal=irebic&page=article&op=view&path%5B%5D=2092


Aspects of Lignocellulosic-Fibre Reinforced “Green” Materials
January 2009 – Canadian Chemical News
Alexis Baltazar, Mohini Sain.
https://www.thefreelibrary.com/Aspects+of+lignocellulosic-fibre+reinforced+%22green%22+materials.-a0203953862


Structure of Glycerol and Cellulose Fiber Modified Water-Blown Soy Polyol-Based Polyurethane Foams
November 2008 – Journal of Reinforced Plastics and Composites 27(16-17), pp. 1745-1758
Indranil Banik, Mohini Sain.
DOI: 10.1177/0731684407081442


Role of Refined Paper Fiber on Structure of Water Blown Soy Polyol Based Polyurethane Foams
September 2008 – Journal of Reinforced Plastics and Composites 27(14), pp. 1515-1524
Indranil Banik, Mohini Sain.
DOI: 10.1177/0731684407086317


Cellulosic Nanocomposites: A Review
August 2008 – Bioresources – 3(3), pp. 929-980
Martin Hubbe, Orlando J. Rojas, Lucian Amerigo Lucia, Mohini Sain.
https://www.researchgate.net/publication/26526522_Cellulosic_nanocomposites_A_review


Determination of the Mineral Constituents of Recycled Paper Mill Sludge
June 2008 – Tappi Journal 7(6), pp. 9-14
Sally Krigstin, Mohini Sain.
https://www.researchgate.net/publication/262797608_Determination_of_the_Mineral_Constituents_of_Recycled_Paper_Mill_Sludge


Isolation and Characterization of Nanofibers from Agricultural Residues – Wheat Straw and Soy Hulls
May 2008 – Bioresource Technology 99, pp. 1664-1671
Ayse Alemdar, Mohini Sain.
DOI: 10.1016/j.biortech.2007.04.029


Analysis of Ink/Coating Penetration on Paper Surfaces by Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) in Conjunction with Principal Component Analysis (PCA)
March 2008 – The Journal of Adhesion 84(3), pp. 277-292
Rana N.S. Sodhi, L. Sun, Mohini Sain, Ramin Farnood.
DOI: 10.1080/00218460801954474


Determination of Fiber Size Distributions of Injection Moulded Polypropylene/Natural Fibers Using X‐ray Microtomography
February 2008 – Advanced Engineering Materials 10(1-2), pp. 126-130
A. Alemdar, Han Zhang, Mohini Sain, G. Cescutti, J. Müssig.
DOI: 10.1002/adem.200700232


Biocomposites from Wheat Straw Nanofibers: Morphology, Thermal and Mechanical Properties
February 2008 – Composites Science and Technology 68(2), pp. 557-565
Ayse Alemdar, Mohini Sain.
DOI: 10.1016/j.compscitech.2007.05.044


Water Blown Soy Polyol-Based Polyurethane Foams of Different Rigidities
January 2008 – Journal of Reinforced Plastics and Composites 27(4), pp. 357-373
Indranil Banik, Mohini Sain.
DOI: 10.1177/0731684407083955


Foamability of Thermoplastic Vulcanizates Blown with Various Physical Blowing Agents
January 2008 – Journal of Cellular Plastics 44(1), pp. 53-67
Seong G. Kim, C.B. Park, Mohini Sain.
DOI: 10.1177/0021955X07079224


Selected Thermoanalytical Methods and their Applications from Medicine to Construction: Part I
December 2007 – Journal of Thermal Analysis and Calorimetry 90(3), pp. 653-662
S.C. Mojumdar, Mohini Sain, R.C. Prasad, L. Sun, James E.S. Venart.
DOI: 10.1007/s10973-007-8518-5


Fractionation of Dry Recycled Papermill Sludge to Higher Value Components
December 2007 – Journal of Biobased Materials and Bioenergy 1(3), pp. 315-322
Sally Krigstin, Mohini Sain.
DOI: 10.1166/jbmb.2007.003


Effects of Raw Fiber Materials, Fiber Content and Coupling Agent Content on Selected Properties of Polyethylene/Wood Fiber Composites
October 2007 – Polymer Engineering and Science 47(10), pp. 1678-1687.
S.Y. Zhang, Yaolin Zhang, Mosto Bousmina, Mohini Sain, Phillip Choi.
DOI: 10.1002/pen.20854


Strength Analysis of Chair Base from Wood Plastic Composites by Finite Element Method
September 2007 – Materials Research Innovations 11(3), 137-143
S. Mishra, Mohini Sain.
DOI: 10.1179/143307507X225623


Isolation of Nanofibers from Soybean Source and their Reinforcing Capability on Synthetic Polymers
September 2007 – Composites Science and Technology 67(11-12), pp. 2521-2527
Bei Wang, Mohini Sain.
DOI: 10.1016/j.compscitech.2006.12.015


Effects of Clay Dispersion and Content on the Rheological, Mechanical Properties, and Flame Retardance of HDPE/Clay Nanocomposites
August 2007 – Journal of Applied Polymer Science 105(4), pp. 1993-1999
Y.H. Lee, C.B. Park, Mohini Sain, M. Kontopolou, Wen-Ge Zhang.
DOI: 10.1002/app.26403


Cars Made of Wood and Hemp Fibres? Why not?
August 2007 – Forestry Chronicle 83(4), pp. 482-484
John Balatinecz, Mohini Sain.
DOI: 10.5558/tfc83482-4


Studies on the Water Absorption Properties of Short Hemp—Glass Fiber Hybrid Polypropylene Composites
August 2007 – Journal of Composite Materials 41(15), pp. 1871-1883
Suhara Panthapulakkal, Mohini Sain.
DOI: 10.1177/0021998307069900


The Effect of Chemically Coated Nanofiber Reinforcement on Biopolymer Based Nanocomposites
August 2007 – Bioresources 2(3), pp. 371-388
Wang Bei, Mohini Sain.
https://www.researchgate.net/publication/26467829_The_effect_of_chemically_coated_nanofiber_reinforcement_on_biopolymer_based_nanocomposites


Effects of Styrene–Ethylene–Butylene–Styrene Based Additives on the Mechanical Properties of Rice Hull/Polypropylene Composites
July 2007 – Polymer Engineering and Science 47(7), pp. 1148-1155
Takashi Kuboki, Y.H. Lee, C.B. Park, Mohini Sain.
DOI: 10.1002/pen.20695


Measurement and Prediction of Thermal Conductivity for Hemp Fiber Reinforced Composites
July 2007 – Polymer Engineering and Science, pp. 977-983
Tayebeh Behzad, Mohini Sain.
DOI: 10.1002/pen.20632


Isolation and Characterization of Nanofibers from Agricultural Residues – Wheat Straw and Soy Hulls
June 2007 – Bioresource Technology 99(6), pp. 1664-1671
Ayse Alemdar, Mohini Sain.
DOI : 10.1016/j.biortech.2007.04.029


Finite Element Modeling of Polymer Curing in Natural Fiber Reinforced Composites
June 2007 – Composites Science and Technology 67, pp. 1666-1673
Tayebeh Behzad, Mohini Sain.
DOI: 10.1016/j.compscitech.2006.06.021


Agro-Residue Reinforced High-Density Polyethylene Composites: Fiber Characterization and Analysis of Composite Properties
June 2007 – Composites Part A Applied Science and Manufacturing 38(6), pp. 1445-1454
Suhara Panthapulakkal, Mohini Sain.
DOI: 10.1016/j.compositesa.2007.01.015


Effect of Propylene Carbonate on the Properties of Composite Fiberboard from Wood Fiber Bonded with Renewable Wood Resin
May 2007 – Journal of Reinforced Plastics and Composites 26(7), pp. 705-713
Mohini Sain, Arun Ghosh, Indranil Banik.
DOI: 10.1177/0731684407075580


Modeling Energy Consumption for the Generation of Microfibres from Bleached Kraft Pulp Fibres in a PFI Mill
May 2007 – Bioresources 2(2), pp. 210-222
Ayan Chakraborty, Mohini Sain, Mark T. Kortschot, Subrata Bandhu Ghosh.
https://www.researchgate.net/publication/26460122_Modeling_energy_consumption_for_the_generation_of_microfibres_from_bleached_kraft_pulp_fibres_in_a_PFI_mill


Dispersion of Wood Microfibers in a Matrix of Thermoplastic Starch and Starch-Polylactic Acid Blend
April 2007 – Journal of Biobased Materials and Bioenergy 1(1), pp. 71-77
Ayan Chakraborty, Mohini Sain, Mark T. Kortschot, Sean Cutler.
DOI: https://doi.org/10.1166/jbmb.2007.008


Dispersion of Soybean Stock‐Based Nanofiber in a Plastic Matrix
April 2007 – Polymer International 56(4), pp. 538-546
Bei Wang, Mohini Sain.
DOI: 10.1002/pi.2167


Starch‐Like Exopolysaccharide Produced by the Filamentous Fungi Ophiostoma Ulmi and O. Novo‐Ulmi
March 2007 – Forest Pathology 37(2), pp. 80-95
Robert Jeng, Christopher L.H. Huang, Mohini Sain, Martin Hubbes, Arturo Rodriguez, B. Saville.
DOI: 10.1111/j.1439-0329.2007.00481.x


Flame Retarding Effects of Nanoclay on Wood–Fiber Composites
March 2007 – Polymer Engineering and Science 47(3), pp. 330-336
Gangjian Guo, C.B. Park, Y.H. Lee, Y.S. Kim, Mohini Sain.
DOI: 10.1002/pen.20712


Study of Structural Morphology of Hemp Fiber from the Micro to the Nanoscale
March 2007 – Applied Composite Materials 14 pp. 89-103
Bei Wang, Mohini Sain, Kristiina Oksman.
DOI: 10.1007/s10443-006-9032-9


Injection‐Molded Short Hemp Fiber/Glass Fiber‐Reinforced Polypropylene Hybrid Composites—Mechanical, Water Absorption and Thermal Properties
February 2007 – Journal of Applied Polymer Science 103(4), pp. 2432-2441
Suhara Panthapulakkal, Mohini Sain.
DOI: 10.1002/app.25486


Effects of Clay Dispersion on the Foam Morphology of LDPE/Clay Nanocomposites
February 2007 – Journal of Applied Polymer Science 103(4), pp. 2129-2134
Y.H. Lee, K.H. Wang, C.B. Park, Mohini Sain.
DOI: 10.1002/app.24908


Polymer Plastic
Feb-07
Mohini Sain, H. Li.
https://www.researchgate.net/publication/294695686_Polym_-Plast


Isolation of Cellulose Microfibrils — an Enzymatic Approach
January 2007 – Bioresources 1(2), pp. 176-178
S. Janardhnan, Mohini Sain.
http://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_01_2_176_188_Janardnan_Sain_Isoluation_Cellulose_Microfibrils_Enzymatic/18


Influence of Styrene Maleic Anhydride Imide on Ink-Jet Print Quality and Coating Structure
January 2007 – Nordic Pulp and Paper Research Journal 22(3), pp. 307-313
J. Sreekumar, Mohini Sain, Ramin Farnood, W. Dougherty.
DOI: 10.3183/NPPRJ-2007-22-03-p307-313


Characterization of Cellulosic Microfibrils for Permeability Studies Through Microfibril Dispersed Biopolymer Films
December 2006 – Journal of Biomechanics 39(1), pp. 26
A. Chakraborty, Mohini Sain.
DOI: 10.1016/S0021-9290(06)84817-7


Influence of Viscosity-Interface Modifier Interactions on Performance and Processability of Rice Hulls PE Composites
November 2006 – International Polymer Processing 21(5), pp. 504-508
N. Dixit, Mohini Sain, Mark T. Kortschot, D. Gulati.
DOI: 10.3139/217.0031


Fiberboard Composites from Wood-fiber Bonded with Renewable Wood Resin
November 2006 – Journal of Reinforced Plastics and Composites 25(16), pp. 1701-1708
Mohini Sain, A. Ghosh, Indranil Banik.
DOI: 10.1177/0731684406068413


Effect of Interactions Between Interface Modifiers and Viscosity Modifiers on the Performance and Processibility of the Rice Hulls-HDPE Composites
November 2006 – Journal of Reinforced Plastics and Composites 25(16), pp. 1691-1699
N. Dixit, Mark T. Kortschot, Mohini Sain, D. Gulati.
DOI: 10.1177/0731684406068412


Production, Characterization, and Mechanical Properties of Starch Modified by Ophiostoma SPP
November 2006 – Bioresources 1(2), pp. 257-269
Chen Bei Huang, Robert Jeng, Mohini Sain, Bradely A. Saville, Martin Hubbes.
www.researchgate.net/publication/26460103_Production_characterization_and_mechanical_properties_of_starch_modified_by_Ophiostoma_spp


Isolation of Cellulose Microfibrils – An Enzymatic Approach
November 2006 – Bioresources 1(2), pp. 176-188
Sreekumar Janardhnan, Mohini Sain.
www.researchgate.net/publication/26460096_Isolation_of_cellulose_microfibrils_-_An_enzymatic_approach


The Effect of Morphology and Chemical Characteristics of Cellulose Reinforcements on the Crystallinity of Polylactic Acid
July 2006 – Journal of Applied Polymer Science 101, pp. 300-310
Aji P. Mathew, Kristiina Oksman, Mohini Sain.
DOI: 10.1002/app.23346


Effect of Water Absorption, Freezing and Thawing, and Photo‐Aging on Flexural Properties of Extruded HDPE/Rice Husk Composites
June 2006 – Journal of Applied Polymer Science 100(5), pp. 3619-3625
Suhara Panthapulakkal, Shiang Law, Mohini Sain.
DOI: 10.1002/app.23152


Biorefinery: Opportunities and Barriers for Petro-Chemical Industries
June 2006 – Pulp and Paper Canada – Ontario 31-33
Muhammad Pervaiz, Mohini Sain.
www.pulpandpapercanada.com/paptac/PDFs/June06/biorefining2.pdf


Resin Transfer Molding of Hemp Fiber Composites: Optimization of the Process and Mechanical Properties of the Materials
June 2006 – Composites Science and Technology 66(7-8), pp. 895-906
M. Couturier, David Rouison, Mohini Sain.
DOI: 10.1016/j.compscitech.2005.07.040


Characterization and Potential Utilization of Recycled Paper Mill Sludge
May 2006 – Pulp and Paper Canada – Ontario 107(5), pp. 29-32
Sally Krigstin, Mohini Sain.
www.pulpandpapercanada.com/paptac/PDFs/May06/recycling.pdf


The Efficacy of Photostabilizers on the Color Change of Wood Filled Plastic Composites
May 2006 – Polymer Degradation and Stability 91(5), pp. 1156-1165
M. Muasher, Mohini Sain.
DOI: 10.1016/j.polymdegradstab.2005.06.024


Evaluation of the Influence of Fibre Length and Concentration on Mechanical Performance of Hemp Fibre Reinforced Polypropylene Composite
March 2006 – Journal of Natural Fibers 2(4), pp. 67-84
Arun Ghosh, Muhammad Pervaiz, Mohini Sain.
DOI: 10.1300/J395v02n04_05


Performance of Natural‐Fiber–Plastic Composites Under Stress for Outdoor Applications: Effect of Moisture, Temperature and Ultraviolet Light Exposure
March 2006 – Journal of Applied Polymer Science 99(5), pp. 1-8
Paul A. Cooper, J.L. Lopez, Mohini Sain.
DOI: 10.1002/app.22884


Nonlinear Viscoelastic Creep Prediction of HDPE-Agro-fiber Composites
March 2006 – Journal of Composite Materials, pp. 417-431
A. Pramanick, Mohini Sain.
DOI: 10.1177/0021998305055197


Study of Moisture Absorption in Natural Fiber Plastic Composites
March 2006 – Composites Science and Technology 66, pp. 379-386
Paul A. Cooper, Mohini Sain, W. Wang.
DOI: 10.1016/j.compscitech.2005.07.027


Surface Characteristics of Untreated and Modified Hemp Fibers
March 2006 – Polymer Engineering and Science 46(3), pp. 269-273
Deepaksh Gulati, Mohini Sain.
DOI: 10.1002/pen.20465


Preparation and Characterization of Wheat Straw Fibers for Reinforcing Application in Injection Molded Thermoplastic Composites
February 2006 – Bioresource Technology 97, pp. 265-272
Suhara Panthapulakkal, Mohini Sain, A. Zereshkian.
DOI: 10.1016/j.biortech.2005.02.043


Bioprocess Preparation of Wheat Straw Fibers and their Characterization
January 2006 – Industrial Crops and Products 23(1), pp. 1-8
Suhara Panthapulakkal, Mohini Sain.
DOI: 10.1016/j.indcrop.2005.01.006


Fungal-Modification of Natural Fibers: A Novel Method of Treating Natural Fibers for Composite Reinforcement
January 2006 – Journal of Polymers and the Environment 14, pp. 347-352
Deepaksh Gulati, Mohini Sain.
DOI: 10.1007/s10924-006-0030-7


Injection Molded Wheat Straw and Corn Stem Filled Polypropylene Composites
January 2006 – Journal of Polymers and the Environment 14, pp. 265-272
Suhara Panthapulakkal, Mohini Sain.
DOI: 10.1007/s10924-006-0021-8


Novel SMA Chemistries in Surface Sizing of Paper and Boards
Jan-06
W. Dougherty, S. Janardhnan, Muhammad Pervaiz, Mohini Sain.
www.researchgate.net/publication/287633712_Novel_SMA_chemistries_in_surface_sizing_of_paper_and_boards


Application of the “Theory of Mixtures” to Temperature-Stress Equivalency in Nonlinear Creep of Thermoplastic/Agro-Fibre Composites
January 2006 – Polymers and Polymer Composites
A. Pramanick, Mohini Sain.
www.researchgate.net/publication/286938796_Application_of_the_theory_of_mixtures_to_temperature_-_Stress_equivalency_in_nonlinear_creep_of_thermoplasticagro-fibre_composites


Foamability of Thermoplastic Vulcanizates (TPVs) with Carbon Dioxide and Nitrogen
January 2006 – Cellular Polymers
B.S. Kang, S.G. Kim, C.B. Park, Mohini Sain.
www.highbeam.com/doc/1G1-180518067.html


Biodegradable Nanocomposites from Wheat Straw
January 2006 – Center for Biocomposites and Biomaterials Processing, University of Toronto
Ayse Alemdar, Mohini Sain.
www.researchgate.net/publication/267703795_BIODEGRADABLE_NANOCOMPOSITES_FROM_WHEAT_STRAW


Temperature-Stress Equivalancy in Nonlinear Visco-Elastic Creep Characterization of Thermoplastic/Agro-Fiber Composites
January 2006 – Journal of Thermoplastic Composite Materials 19, pp. 35-60
A. Pramanick, Mohini Sain.
www.researchgate.net/publication/263386657_Temperature-Stress_Equivalancy_in_Nonlinear_Visco-elastic_Creep_Characterization_of_ThermoplasticAgro-Fiber_Composites


Measurement of the Average Permeability of Natural Fibre Mats in Resin Transfer Molding Application
January 2006 – Polymers and Polymer Composites 14(3), pp. 229-238
M. Couturier, David Rouison, Suhara Panthapulakkal, Mohini Sain.
www.polymerjournals.com/pdfdownload/965302.pdf


Composite from Wood Fiber Bonded with Renewable Wood Resin
January 2006 – Polymers and Polymer Composites 14(3), pp. 217-228
A. Ghosh, Mohini Sain.
www.polymerjournals.com/pdfdownload/965301.pdf


Foamability of Thermoplastic Vulcanizate (TPV) Blown with Nitrogen and Carbon Dioxide
January 2006 – Cellular Polymers
B.S. Kang, S.G. Kim, C.B. Park, Mohini Sain.
www.4spe.org/Resources/resource.aspx?ItemNumber=8675


Reinforcing Potential of Wood Pulp-Derived Microfibres in a PVA Matrix
January 2006 – Holzforschung 60, pp. 53-58
Ayan Chakraborty, Mark T. Kortschot, Mohini Sain.
DOI: 10.1515/HF.2006.010

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Krigstin, S. and Sain, M. “Recovery and Utilization of Fibre from Recycled Papermill Sludge” Paper Technology,46(7): 37-42, 2005 [No. 130]
Bhatnagar, A. and Sain, M. “Processing of Cellulose Nanofiber-reinforced Composites” Journal of Reinforced Plastics and Composites, 24(12): 1259-1268, 2005 [No. 129]
Sreekumar, J., S., Sain, M., Farnood, R., and Dougherty, W. “Styrene Maelic Anhydride Imide-Resin (SMAI): A Novel Cationic Additive in Paper Coating Colour for Ink-Jet Printing” Pulp and Paper Canada, 106(3): T67 – T70, 2005 [No. 128]
Lopez, J. L., Cooper, P., and Sain, M. “Evaluation of Proposed Standard Test Method to Determine Decay Resistance of Natural Fiber Plastic Composites” Forest Product Journal, December 1, 2005 [No. 127]
Behzad, T. and Sain, M. “Cure Simulation of Hemp Fiber Acrylic Based Composites During Sheet Molding Process”Polymers and Polymer Composites, 13(3): 235-244, 2005 [No. 126]
Rouison, D., Sain, M., Couturier, M., MacMillan, B., and Balcom, B. J. “Water Absorption of Hemp Fiber/Unsaturated Polyester Composites” Polymer Composites, 26(4): 509-525, 2005 [No. 125]
Sain, M., Suhara, P., Law, S., and Bouiloux, A. “Interface Modification and Mechanical Properties of Natural Fibre-polyolefine Composite Products” Journal of reinforced plastics and composites, 24(2): 121-130, 2005 [No. 124]
Panthapulakkal, S., Sain, M., and Law, S. ” Enhancement of Processability of Rice Husk Filled High-density Polyethylene Composite Profiles” Journal of Thermoplastic Composite Materials, 18: 445-458, 2005 [No. 123]
Prasad, B.M., Sain, M., and Roy, D.N. “Properties of Ball Milled Thermally Treated Hemp Fibers in Inert Atmosphere for Potential Composite Reinforcement” Journal of Materials Science, 40: 4271-4278, 2005 [No. 122]
Wang, W., Sain, M., and Cooper, P.A. “Hygrothermal Weathering of Rice Hull/HDPE Composites Under Extreme Climatic Conditions” Polymer Degradation and Stability, 90(3): 540-545, 2005 [No. 121]
Mathew, A.P., Oksman, K., and Sain, M. “Mechanical Properties of Biodegradable Composites from Poly Lactic Acid (PLA) and Microcrystalline Cellulose (MCC)” Journal of Applied Polymer Science, 97(5): 2014-2025, 2005 [No. 120]
Chakraborty, A., Sain, M., and Kortschot, M. “Cellulose Microfibrils: A Novel Method of Preparation using High Shear Refining and Cryocrushing” Holzforschung, 59 (1): 102- 107, 2005 [No. 119]
Bhuie, A.K., Ogunseitan, O.A., White, R., Sain, M., and Roy, D.N. “Modeling the Environmental Fate of Manganese from Methylcyclopentadienyl Manganese Tricarbonyl in Urban Landscapes” J. Science of the Total Environment,339(1-3): 167-178, 2005 [No. 118]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Li, H., Law, S. and Sain, M. “Process Rheology and Mechanical Property Correlationship of Wood Flour-Polypropylene Composites” Journal of Reinforced Plastics and Composites, 23(11):1153-1158, 2004, DOI: 10.1177/0731684404035416 [No. 117]
Mehta, A., Sain, M., Ni, Y., and Morneau, D. “Effect of Bioenzyme on Deinking Mill Effluent Treatment by Dissolved Air Flotation, Solutions!” Online Exclusive, Tappi Journal, October 2004 [No. 116]
Panthapulakkal, S., Sain, M., and Law, S. “Effect of Coupling Agents on Rice Husk Filled HDPE Extruded Profiles”Polymer International, 54: 137-142, 2005 [No. 115]
Valton, E., Schmidhauser, J., and Sain, M. “Performance of Cationic Styrene Maleimide Copolymers in the Wet End of Papermaking” Tappi Journal, 3(4): 25-30, 2004 [No. 114]
Mehta, A., Sain, M., Ni, Y., and Morneau, D. “Chemical Additive Optimization Program: Short-Cycle Clarification of Deinking Mill Alkaline-Water loop” Pulp and Paper Canada, 105(3): 43-46, 2004 [No. 113]
Rouison, D., Sain, M., and Couturier, M. “Resin Transfer Molding of Natural Fiber Reinforced Composites: Cure Simulation”Composites Science and Technology, 64(5): 629-644, 2004 [No. 112]
Lin, W.S., Pramanick, A.K., and Sain, M. “Determination of Material Constants for Nonlinear Visco-elastic Predictive Model”Journal of Composite Materials, 38(1): 19-29, 2004 [No. 111]
Lin, W.S., Pramanick, A.K., and Sain, M. “Development of TTMSP to Predict the Performance of Discontinuous Natural Fiber Polymer Composites” Science and Engineering of Composite Materials, 11(2-3): 201-208, 2004 [No. 110]
Prasad, B., Sain, M., and Roy, D. N. “Structure Property Correlation of Thermally Treated Hemp Fiber”Macromolecular Materials Engineering, 289(6): 581-592, 2004 [No. 109]
Behzad, T. and Sain, M. “Cure Study of an Acrylic Resin to Develop Natural Fiber Composites” Journal of Applied Polymer Science, 92(2): 757-762, 2004 [No. 108]
Sain, M., Park, S.H., Law, S., and Suhara, F. “Flame Retardant and Mechanical Properties of Natural Fibre-PP Composites containing Magnesium Hydroxide” Polymer Degradation and Stability, 83: 363-367, 2004 [No. 107]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Grant, J., Li, Z., Court, G., Crowell, M., Mobarak, N., Cole, S., and Sain, M. “Analysis and optimization of used water networks in a TMP mill” Pulp and Paper Canada, 104(11): 49-52, 2003 [No. 106]
Raymond, A. and Sain, M. “Mechanism of fibre mat formation with inorganic-filled mechanical pulp suspensions in papermaking” Appita Journal, 56(5): 376-379+384, 2003 [No. 105]
Babineau, K., Ni, Y., and Sain, M.M. “Effect of acid treatment on removal of anionic trashes from bleached mechanical pulps and the characteristics” Pulp and Paper Canada, 104(7): 31-34, 2003 [No. 104]
Sain, M., Mehta, A., Ni, Y., and Morneau, D. “Clarificación para plantas de destintado: Programa de optimizatión de aditivos químicos” Mari Papel y Corrugado, 16(3): 70-72, 2003 [No. 103]
Pervaiz, M. and Sain, M. “Sheet-Molded Polyolefin Natural Fibre Composites for Automotive Applications”Macromolecular Materials & Engineering, 288(7): 553-557, 2003 [No. 102]
Prasad, B. and Sain, M. “Mechanical properties of thermally treated hemp fibres in inert atmosphere as potential composite reinforcement” Material Research Innovation, 7: 231-238, 2003 [No. 101]
Rouison, D., Sain, M., and Couturier, M. “Resin-Transfer Molding of Natural Fiber- Reinforced Plastic. 1. Kinetic Study of an Unsaturated Polyester Resin Containing an Inhibitor and Various Promoters” Journal of Applied Polymer Science, 89: 2553-2561, 2003 [No. 100]
Li, H., Ni, Y., and Sain, M. “Further Understanding of Polyethylene-Imine Induced Rosin Sizing” Nordic Pulp and Paper Research Journal, 18(21): 5-9, 2003 [No. 99]
Li, H. and Sain, M.M. “High stiffness natural fiber-reinforced hybrid polypropylene composites” Polymer – Plastics Technology and Engineering, 42(5): 853-862, 2003 [No. 98]
Pervaiz, M. and Sain, M. “Carbon storage potential of natural fibre composites” Resources, Conservation and Recycling,39(4): 325-340, 2003 [No. 97]
Bourassa, C., Diamond, M., Sain, M., and Daneault, C. “Mill System Closure and Trash Catching Porous Fillers in Papermaking” Tappi J., 2(2): 14-18, 2003 [No. 96]
Bourassa, C., Diamond, M., Daneault, C., and Sain, M. “Mill System Closure and Trash Catching Porous Fillers in Papermaking” Appita Journal, 56(3): 241, 2003 [No. 95]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Sain, M., Li, H., and Morneau, D. “Chemical-Pretreatment of De-inking Mill Waste Water Prior to DAF” Progress Pap. Recycling, 12(1): 13-18, 2002 [No. 94]
Raymond, A. and Sain, M. “Computer Modeling and Software Development Predicting Dynamic Mat Formation in Paper Machine” Advances in Engineering Software, 33: 181- 189, 2002 [No. 93]
Sain, M. and Li, H. “Enhancement of Strength Properties of Mechanical Pulp” J. Wood. Chem. Technol., 22(4):187-193, 2002 [No. 92]
Li, H., Ni, Y., and Sain, M. “Characterization of BCTMP Fines and Their Effect on Sizing” Tappi J., 1(7): 3-7, 2002 [No. 91]
Sain, M. and Fortier, D. “Flax Shives Refining, Chemical Modification and Hydrophobization for Paper Production” Indus. Crops & Products, 15: 1-13, 2002 [No. 90]
Li, H., Ni, Y., and Sain, M. “Presence of DCS in BCTMP and Their Effect on Sizing” J. Pulp and Paper Sc., 28(2): 45-49, 2002 [No. 89]
Sain, M., Fortier, D., and Lampron, L. “Chemi-Refiner Mechanical Pulping of Flax Shives: Refining Energy and Fibre Properties” Bioresource Technology, 81(3): 193-200, 2002 [No. 88]
Sain, M. and Boucher, J. “Characterization and Properties of Lignocellulose Fibres with Thin-film Deposited Cationic Fibres”Colloids and Surfaces A Physicochemical and Engineering Aspects, 196(2-3): 97-109, 2002 [No. 87]
Bourassa, C., Sain, M., and Daneault, C. “Use of Zeolite as a Microparticle System in the Clarification of Deinking Plant White Water by Dissolved Air Flotation” Cellulose Chemistry and Technology, 36(1-2): 193-202, 2002 [No. 86]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Leduc, C., Daneault, C., and Sain, M.M. “Use of New Oxidising Agents [Peroxide Activated Peroxide-perborate] for the Bleaching of Mechanical Pulp” Appita Journal, 54(3): 314, 2001 [No. 85]
Laroche, H., Sain, M., Houtman, C., and Daneault, C. “POM-assisted Electrochemical Delignification and Bleaching of Chemical Pulp” Cellulose Chemistry and Technology, 35: 503-512, 2001 [No. 84]
Sain, M.M. “Spectroscopic Characterization of Engineered Lignocellulosic Fibres with Monosubstituted Polysiloxane Films”Appl. Spectroscopy Review, 36(1): 119-137, 2001 [No. 83]
Leduc, C., Sain, M.M., and Daneault, C. “Use of New Oxidising Agents for the Bleaching of Mechanical Pulp” Pulp and Paper Canada, 102(1): 34-38, 2001 [No. 82]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Bao, Y., Sain, M., and Robert, S. “Reflectance Spectroscopy and Electrophoresis in the Evaluation of Retention and Loss of Modified Starch” Journal of Pulp and Paper Science, 26(8): 275-279, 2000 [No. 81]
Leduc, C., Sain, M., Daneault, C., Lanouette, R., and Valade, J. “Use of New Oxidising Agents in Refiner: A Route to High Brightness Pulp” Tappi J., 83(4): 77, 2000 [No. 80]
Sain, M., Rivard, J., Leduc, C., and Daneault, C. “Improved-Performance TMP Bleaching Chemicals for Closed Mill Systems Part 1: Metal Management and Bleaching Chemistry” Tappi Journal, 83(4): 78, 2000 [No. 79]
Sain, M., Bourassa, C., and Daneault, C. “Deinking Mill Waste Water Clarification by DAF-Influence of Operating Variables on Clarification Efficiency” Progress in Paper Recycling, 9(4): 37-45, 2000 [No. 78]
Sain, M. “Morphological and physical state of monolayer-forming precursors in engineered fibre-polymer matrix” Polym-Plast Technol. Eng., 39(l): 119-135, 2000 [No. 77]
Sain, M., Rivard, J., Leduc, C., and Daneault, C. “Improved Bleaching Performance with Zeolite Based Bleach Chemicals”Tappi J., p. 21, April, 2000 [No. 76]
Leduc, C., Sain, M., Daneault, C., and Lanoutte, R. “Perborate In-Refiner Brightening of Chemical Pulp” Tappi J., p.23, April2000 [No. 75]
Sain, M. “X-ray photoelectron spectroscopy study of ultrathin-film-forming chemical precursor-engineered lignocellulosic fiber and fiber-mat surfaces” Journal of Applied Surface Science, 158(1-2): 92-103, 2000 [No. 74]
Sain, M., Balatinecz, J., and Law, S. “Creep fatigue in engineered wood fibre and plastic compositions” J. Appl. Polymer Science, 77(2): 260-268, 2000 [No. 73]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Balatinecz, J. and Sain, M. “Wood Fibre-plastics Recycling, Effect of Repeated Recycling” Polym. Symp. Series, p.134-138, 1999 [No. 72]

Sain, M., Daneault, C., and Parenteau, M. “Elimination of Chromophores from Secondary Fibre of Wood Mechanical Pulp 1. Effect of Zeolite on Hydrogen Peroxide Brightening” J.Wood Chem. Technol., 19(1&2): 79-98, 1999 [No. 71]
Khunova, V., Liauw, C.M., Alexy, P., and Sain, M. ” The Role of m-phenylenedimaleimide in Reactive Processing of Poly(propylene)/magnesium Hydroxide Composites: 1. Effect of Processing Temperature and Composite Formulation on Mechanical Properties” Die Angrew. Macromol. Chem., 269: 78-83, 1999 [No. 70]
Hu, Q.Y., Sain, M., and Daneault, C. “Electrochemical Delignification of a Softwood Kraft Pulp with In-situ Regeneratrion of a Catalyst” Paperi ja Puu, 81(l): 63-69, 1999 [No. 69]
Grondin, G., Sain, M., and Daneault, C. “Zeolite Microparticle in Flotation Deinking and its Effect on System Closure”Pulp and Paper Canada, 100(8): 46-50, 1999 [No. 68]
Leduc, C., Sain, M., and Daneault, C. “In-Refiner Perborate and Peroxide Bleaching of softwood” Appita J., September,1999 [No. 67]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Balatinecz, J.J. and Sain, M.M. “The influence of Recycling on the Properties of Wood Fibre — Plastic Composites”Macromolecular Symposia, 135(1): 167-173, DOI: 10.1002/masy.19981350119, 1998 [No. 66]
Leduc, C., Sain, M., and Daneault, C. “Le Perborate de Sodium: Une Solution Efficace pour le Blanchiment des Pâtes Mécaniques de Notre Industrie” Les Papetieres du Québec, 9(6): 20-26, 1998 [No. 65]
Sain, M., Khunova, V., Hurst, J., and Balatinecz, J. “The Influence of Filler on Composite Rheological Properties”Plasty a Kaucuk, 35(7): 199-203, 1998 [No. 64]
Sain, M. “Effect of Monolayer Forming Precursor in Engineered Fibre-polymer Matrix” Reinforced Plastics and Polymer Journal, October, 1998 [No. 63]
Leduc, C., Sain, M., Lanouette, R., Daneault, C., and Valade, J. “In-Refiner Perborate Treatment of Softwood TMP to Modify Fibre Properties” Tappi Journal, October, 1998 [No. 62]
Brouillette, F., Sain, M., and Daneault, C. “Effect of Moisture Profile and Noncombustible Matter in Recycled Paper-mill Sludge on Energy Recovery” Combust. Sci. and Tech., 139: 191-206, 1998 [No. 61]
Sain, M., Daneault, C., and Grondin, G. ” The modified zeolite in waste paper recycling – Shows promise to chelate metals and stabilize peroxide in repulping process” Pulp and Paper Canada, 99(7): 64-67, 1998 [No. 60]
Tremblay, E., Sain, M., Daneault, C., and Lapointe, M. “The Effect of Planetary Mixing in Repulping of Photocopied Papers”Prog. Paper Recycling, 8(l): 45-53, 1998 [No. 59]
Sain, M., Khunova, V., Hurt, J., and Balatinecz, J. “Rheological Properties of LC Modified Fibre-filler Composites”Plasty a Kaucuk, 7: 30-34, 1998 [No. 58]
Sain, M. “Effect of In-refiner Plastification of Lignin for RMP-flax and TMP Engineered Fibre Blends” Holforzung, October,1998 [No. 57]
Broulette, F., Sain, M., and Daneault, C. “Auto-Combustion of Solid Sludge from Paper Mill Waste” J. Combustion Science and Technology, 62(4): 16-34, 1998 [No. 56]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Chabot, B., Daneault, C., Sain, M., and Dorris, G.M. “The adverse role of fibres during the flotation of flexographic inks: Fibres affect the formation and growth of flexographic ink-calcium soap aggregates” Pulp and Paper Canada, 98(12): 115-121, 1997 [No. 55]
Sain, M. and Daneault, C. “Comparison between peroxide prebleaching and postbleaching sequence of ONP with alternative chemicals: Chances and limitations: Use of various other chemicals can increase brightness and reduce effluent loads” Pulp and Paper Canada, 98(9): 49-53, 1997 [No. 54]
Sain, M. and Daneault, C. “Improved Peroxide Bleaching of Deinked ONP with Zeolite Based Replacement Chemicals”Appita J., 50(l):61-67, 1997 [No. 53]
Sain, M., Daneault, C., and Parenteau, M. “Elimination of Chromophore from Wood-based Waste Pulp” J. Wood Sci. Technol, June, 1997 [No. 52]
Sain, M., Daneault, C, and Parenteau, M. “Bleach Activation of Thermomechanical Pulp” Can. J. of Chemical Eng.,75(1): 62-69, 1997 [No. 51]
Tremblay, E., Daneault, C., Sain, M., and Lapointe, M. “La Trituration Planetaire: Mecanisme Efficace pour le Sequence de Papier Photocopiers” Revue A.T.I.P., 51(6): 222-226, 1997 [No. 50]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Marchildon, L., Daneault, C., Leduc, C., and Sain, M. “Deinking Conditions for Yellow Directory Using Formamide Sulfinic Acid as a Repulping Chemical” J. Cellulose Chem. Technol., 30(5-6), 1996 [No. 49]
Daneault, C., Sain, M., and Lavoie, C. “Graft copolymerization onto wood fibres. Ozone-activated hydrophobization of pretreated wood pulp” Acta Polymerica 47(4): 177-180, 1996 [No. 48]
Sain, M., Marchildon, L., and Daneault, C. “Flexo Ink and Deinking-problem or Solution!” American Ink Maker, 12: 25-37, 1996 [No. 47]
Sain, M. and Daneault, C. “Thermo-oxidative behaviour of water-borne ink binders in the presence of monovalent metal ion” Polymer Degradation and Stability, 51(1): 67-75, 1996 [No. 46]
Sain, M.M., Marchildon, L., Lapointe, M., Daneault, C. “A novel chemistry to ink separation from mixed paper waste contaminated with flexo ink” Nordic Pulp and Paper Research Journal, 11(3): 157-163, 1996 [No. 45]
Prasakis, J., Sain, M., and Daneault, M. “Metal management improves peroxide bleaching of TMP” Tappi J.,79(10): 161-166, 1996 [No. 44]
Sain, M., Daneault, C., and Lapointe, M. “Water-based Ink Vehicles in Micro-ink Agglomeration” American Ink Maker, 74(4): 26-42, 1996 [No. 43]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Sain, M., Marchildon, L. and Daneault, C. “A Correlation Between Ink Separation Chemistry and Deinked Paper Properties Affected by Micro-ink Flotation” Prog. Paper Recycling, p. 54-60, November, 1995 [No. 42]
Sain, M., Marchildon, L., Daneault, C., Pednault, C., and Robert, S. “Infrared Energy Transfer Mechanism in Constant and Falling Rate Periods of Paper Drying” Appita Journal, 48(5): 351-357, 1995 [No. 41]
Sain, M., Pednault, C., Marchildon, L., and Daneault, C. “Drying Characteristics-Property Correlationships in Gas-fired Infrared Drying of Paper” Applied Spectroscopy Review, 30(1-2): 13-33, 1995 [No. 40]
Khunova, V. and Sain, M. “Optimization of mechanical strength of reinforced composites. 1. Study on the effect of reactive bismaleimide on the mechanical performance of CaCO3-filled PP.” Die Angrew. Makromol. Chemie,224(1): 9-20, 1995 [No. 39]
Khunova, V. and Sain, M. “Optimization of mechanical stength of reinforced composites. 2. Reactive bismaleimide-modified polypropylene composites filled with talc and zeolite” Die Angrew. Makromol. Chemie,72(4): 77, 1995 [No. 38]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Sain, M. and Kokta, B.V. “Polyolefin-wood Filler Composite. I. Performance of m-Phenylene Bismaleimide-modified Wood Fiber in Polypropylene Composite” J. Appl. Polym. Sci., 54(10): 1545-1559, 1994 [No. 37]
Sain, M., Kokta, B.V., and Imbert, C. “Structure-property Relationship in Wood Fiber-filled Polyolefin Composites” J. Polym. Plast. Technol., 33(l): 89-104, 1994 [No. 36]
Sain, M. and Kokta, B.V. “Response Surface Methodology a Useful Tool for Optimization of Molecular Adhesion and Mechanical Properties of PP Composites” J. Reinforced Plast. Comp., 13(1): 38-53, 1994 [No. 35]
Sain, M.M., Daneault, C., and Marchildon, L “A study on the ink-fiber interfacial interaction in waste printed paper I. The effect of a custom-designed polymeric additive on flotation de-inking of solvent-treated wastepapers” Cellulose 1(4): 221-235, 1994 [No. 34]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Sain, M.M. and Kokta, B.V. “Study on molecular interaction in polyfunctional maleimide-modified polypropylene/pulp composites by ESCA, FTIR, and DSC” Journal of Adhesion Science and Technology, 7(7): 743-760, 1993 [No. 33]
Sain, M., Imbert, C., and Kokta, B.V. “Composites of Surface Treated Wood Fibre and Recycled Polypropylene”Die Angrew. Macromol. Chemie., 210 (3586): 33-46, 1993 [No. 32]
Sain, M. and Kokta, B.V. “Effect of Solid-state Modified Polypropylene on the Physical Performance of Sawdust-filled Polypropylene Composites” J. Adv. Polym. Technol., 12(2): 167-183, 1993 [No. 31]
Sain, M., Kokta, B.V., and Maldas, D. “Effect of Reactive Additives on the Performance of Cellulose Fibre-filled Polypropylene Composites” J. Adhesion Sci. Technol., 7(1): 49-61, 1993 [No. 30]
Sain, M. and Kokta, B.V. “Toughened Thermoplastic Composite I. Effect of Crosslinkable Phenolic and Epoxy Resin Coated Cellulosic-filled Polypropylene Composites” J. Appl. Polym. Sci., 48(12): 2181, 1993 [No. 29]
Sain, M. and Kokta, B.V. “A Study of Molecular Interaction in Wood Fibre-filled Polypropylene Composites” J. Adhesion Sci. Technol., 7(1): 49-61, 1993 [No. 28]
Hudec, I., Sain, M., and Sunova, V. “Improved Interaction Effected by Maleic Anhydride Grafted PP in PRP Triblock Polymer-EVA Copolymer Blend” J. Appl. Polym. Sci., 49(3): 425, 1993 [No. 27]
Khunova, V., Sain, M., and Simek, I. “Studies on the Effect of Reactive PP on The Properties of Filled Polyolefin Composites, Part 2.Optimization of Product Composition and Mechanical Properties of Modified PP Composites” Polym.-Plast Technol.,32(4): 299-309, 1993 [No. 26]
Khunova, V., Sain, M., and Brunovska, Z. “Studies on the Effect of Reactive PP on the Properties of Filled Polyolefin Composites, Part 3.Effect of Maleic Anhydride Grafted PP on the Nature of Polyolefin Matrix”Polym.-Plast Technol., 32 (4): 311-320, 1993 [No. 25]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Sain, M., Oravec, J., Sain, E., and Beniska, J. “Contribution to covulcanization of elastomers and plastic blends”Acta Polymerica, 43: 50-54, 1992 [No. 24]
Grof, I., Sain. M., and Durcova, O.” Structure-property Relationship of Polypropylene-polycaproamide Fiber” J. Appl. Polym. Sci., 44(6): 1061-1068, 1992 [No. 23]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Hudec, I., Sain, M., and Kozankova, J. “Scanning Electron Microscopy Methods for Studying Interfacial Interaction in Polymer Blends” J. Polym. Testing, 10: 378-397, 1991 [No. 22]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Sain, M., Beniska, J., Simek, I., and Rosner, P. “Optimization of Blend Composition in Modified Natural Rubber and Polypropylene Blends” J. Polym. Mat., 7: 49-52, 1990 [No. 21]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Sain, M., Lacok, J., Beniska, J. and Bina, J. “Ethylene Vinyl Acetate Copolymer, Part. 2. Effect of Polyethylene Loading and Dynamic Crosslinking on Filled Copolymer with Improved Fire Resistance” Kaustch. Gummi Kunst.,42 (01): 1011-1012, 1989 [No. 20]
Sain, M., Lacok, J., Beniska, J., and Bina, J. “Ethylene Vinyl Acetate Copolymer, Part 1. Properties of Filled Copolymer with Improved Fire Resistance” Kaustch. Gummi Kunst, 42(8): 572-573, 1989 [No. 19]
Sain, M., Lacok, J., and Beniska, J. “Nonsulfur Vulcanization of Natural Rubber and Polyethylene Blends” Rubber MIA, XII (6): 15-19, 1989 [No. 18]
Oravec, J., Sain, M., and Beniska, J. “Effect of Nonconventional Vulcanizing Agents on the Properties of NBR Rubber”Plasty a Kaucuk, 26: 178-80, 1989 [No. 17]
Sain, M., Beniska, J., and Rosner, P. “Vulcanization of Natural Rubber and Low Density Polyethylene and Thermo-oxidative Properties of the Covulcanizates” J. Polym. Mat., 6: 9 13, 1989 [No. 16]
Sain, M., Oravec, J., Lacok, J., and Beniska, J. “Studies on the modification of nitrile rubber-poly(vinyl chloride) blends. Effect of nonconventional vulcanization systems” Acta Polymerica, 40(10): 648-652, 1989 [No. 15]
Sain, M., Hudec, I., Beniska, J., and Rosner, P. “Contribution to Heterogeneity in Elasto- plastic Blends” J. Mat. Sci. En.,A108: 63-71, 1989 [No. 14]
Sain, M., Lacok, J., Beniska, J., and Bina, J. “Use of Rheometer for Quantitative Estimation of Cure Rate for NR-LDPE Blends” Acta Polymerica, 40(2): 136-37, 1989 [No. 13]
Tikku, V.K., Sain, M., and Pradhan, N.K. “Fluorocarbon Polymer, an Ideal Polymer for Wire and Cable Insulation”J. Kilowatt,23: 9-13, 1989 [No. 12]
Sain M.M., Lacok, J., Beniska, J., and Bina, J. “Estimation of cure characteristics of natural rubber-polyethylene blends by use of a rheometer” Acta Polymerica, 40(2): 136, 1989 [No. 11]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Sain, M., Lacok, J., Beniska, J., and Khunova, V. “Effect of Crosslinking Methods on Bismaleimide Cured Natural Rubber-polyethylene Blends” Kaustch. Gummi Kunst, 41(9): 895-897, 1988 [No. 10]
Lacok, J., Sain,M., Bina, J., and Gal, E. “Crosslinking of NBR-PVC Blends in Presence of P-Nitroso Di-Phenylamine” . Elektroteknica Kablo, 41: 177-182, 1988 [No. 9]
Lacok, J., Sain, M., Bina, J., and Beniska, J. “Static and Dynamic Vulcanization of NR-LDPE Blends” J. Electro-teknica Kablo, 41: 126-131, 1988 [No. 8]
Sain, M., Hudec, I., Beniska, J., and Rosner, P. “Structure Property Relationship in Rubber Modified PRP Triblock Polymer Blends” Rubber Chem. Technol., 61(5): 747-759, 1988 [No. 7]
Sain, M., Beniska, J., and Rosner, P. “NR-PRP Triblock Polymer Blends, Part 2. Mathematical Approach to Compound Design and Property Optimization” Kaustch Gummi Kunst., 41(6): 538-540, 1988 [No. 6]
Sain, M., Beniska, J., Simek, I., and Rosner, P. “NR-PRP Triblock Polymer Blends, Part 1. Blend Composition and Mechanical Properties” Kaustch Gummi Kunst., 41(5): 441-444, 1988 [No. 5]
Sain, M., Hudec, I., and Beniska, J. “Use of microscopic methods for estimation of phase morphology in rubber/polyolefin blends” Polymer Testing, 8(4): 249-559, 1988 [No. 4]

Please excuse our ongoing process of uploading publications to our new website in order from newest to oldest. Thank you, and please check back later for these publications!**********************************************************************************************************************************************
Beniska, J., Sain, M. and Hudec, I. “Interfacial Effects in Polymer Blends” Polymer Preprints, 28(2): 379-380, 1987 [No. 3]
Sain, M., Rosner, P., and Beniska, J. “Studies on NR-LDPE Blends-mooney Rivlin Constant and Mechanical Properties” Kaustch Gummi Kunst., 40(5): 451-453, 1987 [No. 2]



Diffusion of Rubber Additives in Elastomers
Jan-83
Mohini Sain
https://www.researchgate.net/publication/262836396_Difussion_of_Rubber_Additives_in_Elastomers

Study of X-Ray Flare in Relation to Corresponding Sudden Phase Anomaly
November 1970 – IETE Journal of Research 111(A9)
U.K. Rao, Mohini Sain.
DOI: 10.1080/03772063.1970.11486677
+2017

Understanding the Stress Relaxation of Polymers Reinforced with Short Elastic Fibers

April 2017 Materials – 10(5)

Mark T. Kortschot, Numaira Obaid, Mohini Sain.

DOI: 10.3390/ma10050472


Topochemistry of Cellulose Nanofibers Resulting from Molecular and Polymer Grafting
May 2017 Cellulose – 24(5)

Mobina Ahmadi, Rohollah Bagheri, Tayebeh Behzad, Mehran Ghiaci, Mohini Sain.
DOI: 10.1007/s10570-017-1254-5